Review of Teslacigs Shinyo Kit. First Look

Review of Teslacigs Shinyo Kit. First Look

Today we will look at a rather unusual box mod from Teslacigs called Shinyo, as well as its complete tank Tind Tank.

The Chinese manufacturer of Teslacigs devices is currently a fairly well-known and recognizable brand. During its long activity, the just-mentioned company has released many devices, some of which have truly become popular. Of course, we are talking mainly about box mods performed by Teslacigs, the range of which has recently been replenished with a remarkable new product. We present to your attention the Shinyo Kit.

The Shinyo Kit consists of a box mod of the same name and a maintenance-free Tind Tank, and the “kit” is available in four colors: blue, steel, gunmetal and green. The atomizer is made of stainless steel, and the box mod is made of zinc alloy with rubberized inserts on the sides for better ergonomics. canadian vape shop toronto One of the distinctive features of the mod is the centrally located connector and symmetrical body shapes, which the manufacturer itself emphasizes.

The Shinyo Mod will be powered by two 18650 batteries, the compartment for which is hidden under the back cover with magnets. In this form, the device will be able to produce up to 213 watts of power.

It is impossible not to note another feature of the box mod – a large color TFT display with a diagonal of 2 inches, which will display all the information necessary for an ordinary user. In addition, Shinyo Mod also has the ability to update the firmware and several interface languages, including Russian, which is quite a rare phenomenon.

The complete Tind tank is a fairly typical non-serviceable one with a very large diameter of 28 mm. The tank received an impressive volume of 4.5 ml with an installed “bubble glass”, a wide drip tip and airflow adjustment using the lower rotary ring.

As a filling system, Tind Tank uses a standard method with a screw-on top cap on the thread, no surprises here. The performance of the device will be provided by only one type of maintenance-free evaporators – TS-X3 Mesh Coil 0.18Ω, designed for a power range of 70-80 W.

Teslacigs Shinyo Kit Specifications:

Mod dimensions: 50mm*29mm*90mm

Weight: 191g

Power: 2*18650

Output power: 5-213W

Output voltage: 1-7.5V

Operating modes: KA, TC (Ni, Ti, SS316, TCR)

Preheating modes: Hard, Norm, Soft, User

Supported resistance: 0.1-3.0Ω

Charging: 5V 1.5A

Tank dimensions: 28mm*51mm

Material: SS + PC

Weight: 57g

Capacity: 4.5ml

Evaporators: TS-X3 Mesh Coil 0.18Ω

Similar Posts

  • Review of Vaporesso LUXE 80 POD Mod kit

    Not so long ago the appearance of such format as pod-mods was perceived by many vapers if not with enthusiasm, then at least with pleasant surprise, because it is possible to get a compact and productive device. So it is not surprising that pod-mods are mass-produced by almost all manufacturers, and in quite original designs….

  • Review of  Skill Mod SvoëMesto & VapersMD

    In today’s article, we will get acquainted with a new product that has not yet been announced, the Skill mechanical mod. The Skill mechanical mod got its name from the Skill RDA dripper that was released a long time ago, that’s understandable. The design of the device is made in a very restrained style, but…

  • Review of UD Pollux S Kit. First look

    Today we will get acquainted with the new creation of the once popular company UD in the person of the Pollux S Kit starter kit. At the dawn of the development of the modern vape industry, the Chinese manufacturer UD was distinguished by enviable relevance and demand, time after time releasing hits in the form…

  • Review of Hannya RTA by Blitz Enterprises

    Hannya RDA was one of the first atomizers without racks and popularity of Blitz Enterprises jumped to the sky, they have released great devices before, but this one stood out with its peculiarity. The guys from Blitz Enterprises decided not to stop there and released a tank with the same base as the drip, I…

  • Review of SMOK Arcfox Kit

    If you look closely at the devices on the vape market, there is an interesting feature that many manufacturers who started to mass produce PODs and submods, somewhat suspended their production and began to offer more and more traditional box mods and sub-mods. And one of the leaders in this industry is Smok, which recently…

  • Review of Uwell Aeglos H2 Pod Mod Kit

    If a vaper stepped on the bright side five or six years ago, he probably remembers the first vapers that were successfully replaced by mech mods (often of dubious quality), 200+ watt box mods with 4 batteries, vapers with porn coils and tanks with 8 spirals. But, unfortunately or fortunately, progress is not standing still,…