Review of Druga Squonk Box Kit (Druga Squonker)

Quite recently, the Chinese company Augvape, famous for its dripper with an “almost unique” installation of coils, presented a squonk kit to the community — Druga Squonk Box Kit or Druga Squonker.

Augvape can hardly be called an innovator in the vaping market; all the company’s solutions often have very similar analogues. Including the popular Druga dripper, which our vapers seem to love more because of its name than because of the design of the stands, reminiscent of the American-Moldovan brainchild Skill RDA. However, this does not prevent the Chinese manufacturer from sometimes reacting quite sensitively to fashion trends, as eloquently evidenced by the appearance of a squonk with the same name — Druga Squonk Box Mod with a complete Druga RDA 22mm atomizer.

Druga Box Squonk Kit Packaging

The entire Druga Squonk kit comes in bubble wrap, the kind used to pack fragile items, which can hardly be called packaging at all. canada vapes online On the device itself is a small black cardboard shirt half-height with gold lettering: on the front side is the name of the device, social network icons and the manufacturer’s address, on the other side are the company details and a few familiar icons with certificates and restrictions.

Druga Squonker delivery set

Druga RDA 22mm dripper

Druga Squonk Box Mod

5ml liquid bottle

810 ULTEM drip tip

510 drip tip adapter

Single coil adapter

Spare O-rings

Replaceable positive pin for use without a squonk

Hex key

The entire set fits in the box, including the “new old” Druga RDA 22mm dripper. The entire manual is a piece of cardboard with a double-sided illustration demonstrating which side the nut on the connector should be turned towards the button for better contact.

Appearance and design of Druga RDA 22mm

The Druga RDA dripper is familiar to almost all fans of inexpensive but good Chinese devices, in our case the device is exactly the same, but with some changes. The skirt in my copy is made of stainless steel (I can’t say what the painted ones are made of), not anodized aluminum, i.e. the device will heat up noticeably more. And the diameter reduced from 24mm to 22mm will only contribute to this. On one side of the skirt there is a familiar logo of two Ds, the atomizer is crowned with a drip tip made of yellow Ultem with the name of the atomizer.

Characteristics of Druga RDA 22mm

Material: stainless steel 304

Diameter: 22mm

Height: 22mm (with included drip tip: 28mm)

Connector: 510 gold plated (25K)

Gold plated base (24K)

CNC engraving

Two-post design with a convenient clamping system

PEEK insulators

Ability to use with squonks and on regular mods

Use with two or one coil

Colors: steel, black, red and blue

Appearance of DRUGA RDA 22mm from above Appearance of DRUGA RDA 22mm from below

The drip tip with engraving is very small (∅16mm) and thin, practically does not cover the upper dome, it heats up a lot on its own and you can easily burn your lips on the steel body of the drip tip. In general, the same as the older “friend”. It is better to replace it with something more familiar “gun” with an external diameter of 18 mm at the first opportunity. The kit includes a delrin adapter for use with 510 drip tips that are going out of fashion, together with the airflow adjustment you can get almost a cigarette puff with the corresponding mouthpiece. On the bottom plane there is a deep engraving By Vapeshouse and Augvape, a couple of pictograms and the serial number of the atomizer.

The base and winding of the Druga RDA 22mm

The deck of the dripper has not undergone any changes, it is the same convenient system of two sawn screws with knurled caps and slots for a Phillips screwdriver that screw on top. The coils are conveniently installed by screwing the caps with your fingers and then pressing them with a screwdriver. The posts themselves are very thin, you should handle them carefully so as not to break them, and it is better not to completely unscrew the nuts unless necessary. The dripper’s bath is quite roomy, the airflow holes are located a millimeter above the side, you can even afford to overfill a little.

Installing the winding in the DRUGA RDA 22mm Laying cotton wool in the DRUGA RDA 22mm

There is no wisdom in installing the coils, I took one small fused clapton on a 2.5 mm mandrel, and closed the place for the second coil with a complete plug. The only difficulty that may arise is inserting short coils, because the distance between the posts is quite large. The main condition when laying cotton wool is not to cover the ends of the wick with the squonk hole for supplying liquid, so as not to impede its flow into the atomizer bath.

Appearance of DRUGA RDA 22mm

The Druga Squonk box is very small and compact, made entirely of black plastic with a pleasant soft-touch coating, which is instantly covered with fingerprints. There is only one lid in our device – on the side where the window for the jar is located, on the same side is the logo of the box mod. On the opposite side from the button is the manufacturer’s logo, that’s all the decorations. The hole for the finger is small, but for me it was still quite convenient so as not to tear off the lid every time you press the bottle.

Characteristics of Druga Squonk Box

Material: plastic (heat-resistant polymer construction)

Button: ULTEM

Contacts: silver-plated

Dimensions: 72.5 mm * 24.5 mm * 45 mm

Jar volume: 5 ml

Powered by 18650 battery

Magnetic lid

Rounded design

Appearance of DRUGA SQUONK BOX MOD from above Appearance of DRUGA SQUONK BOX MOD from below

The connector of the box mod is made entirely of stainless steel, the platform for the ∅22 mm atomizer has no grooves or decorations, sometimes the “native” dripper firmly sticks to the battery block. The connector is adjustable (can be adjusted with the included Allen key), there is a very small reserve of the insulator stroke, but you should not press it too much. There are no markings or decorative elements on the bottom plane.

Impressions and conclusions

Appearance of DRUGA SQUONK BOX MODAugvape Druga Squonk Box Kit offers the user a classic bottom feeder in a compact plastic case with a small dripper, a reduced to 22mm version of the familiar Druga RDA. The processing of both the box and the atomizer does not cause any complaints.

Liked:

Lightweight, small, convenient kit

Delicious 22mm dripper

Easy installation of coils

Using both one and two coils

Nice and convenient button from ULTEM

Easy maintenance of the contact group

Disliked:

Included thin drip tip

Thin plastic case

Easily soiled coating of the box

Thin metal dripper

Very tight dome rotation

Hard plastic jar

You can’t see the level of the remaining liquid

It is inconvenient to remove the battery