Review of Wismec Skyladon

Review of Wismec Skyladon

In this review, I will tell you about another rather old, but surprisingly relevant mechanical mod from WISMEC — Skyladon.

Wismec Skyladon packaging

Appearance and features of Wismec Skyladon

Dimensions of Wismec Skyladon

Conclusions

Price in online stores: SOURCEMORE $15.43 |

Wismec Skyladon packaging

The mod is sold in a minimalistic plastic transparent box. Through the top cover you can see the mod itself, the hybrid connector and a paper insert with the name of the device.

On one of the ends there is a sticker with the manufacturer’s web address, the serial number of the device and a strip under which you can find the originality verification code.

Technical information is clearly visible through the “bottom” of the device: that this is a mechanical mod, that it is made of steel, that it is for an 18650 battery, consists of several parts, how to assemble and how to replace the connector. canada vape store Well, and a scattering of icons, where would we be without them.

Appearance and features of Wismec Skyladon

The design of this mod is extremely simple: a smooth pipe with a diameter of 22 mm. On the bottom there is a small decoration in the form of the name of the mod and three holes for emergency gas release.

Dimensions of Wismec Skyladon

Material Steel

Connector Hybrid or spring-loaded

Height of the mod with a spring-loaded connector 93 mm

Height of the mod with a hybrid connector 84.6 mm

Diameter of the mod 22 mm

Button mechanism Magnets

Button lock No

Adjustment for battery Only with a spring-loaded connector

WISMEC Skyladon – connector and button

A completely disassembled mod consists of many parts (not all of them are even visible in the photo), and almost all of these parts require periodic maintenance during operation, which is the main disadvantage.

The body of the mod (or the main pipe) is unremarkable except for the threads on both sides and three holes for gas outlet. The quality of workmanship is excellent, the threads are good and smooth. Due to the lower location of the emergency holes, there is an opinion about the correct installation of the battery with the plus down. However, I do not adhere to such advice and install the batteries with the plus up. More precisely, with the minus down, since the battery in the Slyladon is installed “through the top”. Yes, you do not need to unscrew the button anymore, but you do need to remove the connector.

WISMEC Skyladon – connectors

The hybrid connector is brass and looks quite standard for its function: there is an external thread; there is an internal 510, two holes for easy unscrewing and a plastic insulator, which must be installed facing the battery contact.

The spring-loaded connector is more interesting: it is steel, tall and with radiator ribs. On the outside it has the inscription WISMEC and “Designed in California”, and on the bottom (in the photo just above) you can see a contact pad with two holes for disassembly.

WISMEC Skyladon – connector in disassembly

The mechanism for adjusting to the pin of your evaporator is made of five elements: a steel case with a radiator, a plastic black insulator and brass parts, with a conical spring between them, providing the auto-tuning system itself. With this same unit you can slightly adjust the mod to your battery, if it turns out to be shorter than usual, although this is usually not required. And in general – for RDA and RDTA it is better to use a hybrid connector, and for tanks with no maintenance – take a board ���

Conclusions

The mod is outwardly nice and suitable for use with evaporators, the winding in which does not fall below 0.2 or, in extreme cases, 0.1 Ohm. For more “extreme” windings, Slyladon is no longer suitable – the button starts to heat up and the pusher quickly becomes covered with black dots. The radiator on the spring-loaded connector dissipates heat well and during intensive vaping, the device has time to cool down between puffs. The delivery set is very poor, “thanks” for the hybrid connector, but for the lack of spare magnets or spring – dislike. The button (if you don’t touch it) is quite convenient, presses easily and does not rattle when free.

Similar Posts

  • Review of Vaporesso LUXE 80 POD Mod kit

    Not so long ago the appearance of such format as pod-mods was perceived by many vapers if not with enthusiasm, then at least with pleasant surprise, because it is possible to get a compact and productive device. So it is not surprising that pod-mods are mass-produced by almost all manufacturers, and in quite original designs….

  • Review of Griffin 25 mini by GeekVape

    GeekVape continues to milk the cow while it gives milk by releasing a new version of the tank from the Griffin series. This time they decided to make a mini version called Griffin 25 mini. As you have realized, the diameter of the tank has not changed, but the height and volume have significantly decreased….

  • Review of Augvape Druga RTA

    For many vapers who came to the light side of vapor five or six years ago, the current trends of vaping development came as a big surprise, when instead of powerful box mods and drip tips with 0.05 ohm resistance, POD-systems and sub-mods became in demand. Therefore, vapers who appreciate taste and flavor, categorically refuse…

  • Review of OXVA Arbiter RTA 2

    The OXVA Arbiter RTA 2 is an innovative tank produced by Geek Vape’s subsidiary, OXVA. Known for their high-quality vaping products, OXVA’s latest offering is set to deliver an exciting vaping experience. In this review, we will explore the tank’s features, design, functionality, and overall performance. Key Features The OXVA Arbiter RTA 2 packs several…

  • Review of HCigar Fodi RDTA – not a bad drip tank

    Today I will tell you about a new drip tank from Hcigar -” HCigar Fodi RDTA. It got its popularity due to good boxmods from Hcigar. It has a pleasant appearance, a very attractive price and a tasty package, so that it is simply impossible to pass by! Available in two colors – steel and…

  • Review of MGO BOX Pod device. I’ll take you with me

    The popularity of disposable ENDS is not losing ground, and therefore the market is releasing more and more new solutions. In this article we will talk about one of the Chinese new products – the MGO BOX set from Sunmon. MGO BOX packaging MGO BOX packaging at the back There is no information about this…