Review of HCigar Fodi RDTA - not a bad drip tank

Review of HCigar Fodi RDTA – not a bad drip tank

Today I will tell you about a new drip tank from Hcigar -” HCigar Fodi RDTA. It got its popularity due to good boxmods from Hcigar. It has a pleasant appearance, a very attractive price and a tasty package, so that it is simply impossible to pass by! Available in two colors – steel and black.

HCigar Fodi RDTA

The main distinguishing feature of the drip tank is the bottom tank and the possibility of installing a single coil, as it comes with a plug on one of the sides. The tank is made of 316 stainless steel and has an acrylic driptip. The tank consists of 4 main parts: tank with vaporization chamber, the glass of which can be replaced, body, topkep for 510 driptip, which I think can be used as a wide driptip and 510 driptip.

The holes in the posts are 2mm, which will allow you to install very fat windings on 1 coil, but I don’t think you can do it on 2 coils, you’ll probably have to settle for a regular clapton. The insulator is not made of delrin, which is odd for a $30 drip, it is made of ceramic, which will keep the posts alive for a very long time. canadian vape shop There are 4 holes for laying absorbent cotton and they have a diameter of 4 mm.Also I would like to say that bakodripka has a gold-plated customizable pin and has 2 large (6x2mm) blow holes, which are adjustable by rotating the body. Filling also deserves a separate attention, for filling the tank there is a separate hole near the racks, which is closed with a silicone plug.

Technical specifications of the vaporizer

Diameter – 22 mm

Height with standard drip tip – 58 mm

Tank volume: 2,5 ml

2 blowing holes 6×2 mm

2 racks with 1 hole in each, diameter 2 mm

adjustable pin, gold-plated;

comes with a spare glass and a plug for 1 coil

Similar Posts

  • Review of Advken Ayana Kit. First Look

    This article will discuss a new set of a box mod and a dripper called Ayana Kit from Advken. Most Chinese manufacturers produce their box mods complete with simple maintenance-free tanks, which at best are never removed from the boxes by experienced users, and most often the mods are bought separately. However, not all companies…

  • Review of Innokin MVP5 Ajax Kit. First Look

    In today’s article, we will look at a box mod with a flashlight, compass and other features for outdoor activities called MVP5 from the Chinese manufacturer Innokin. Box mods for an active lifestyle are far from uncommon in the modern vaping industry. Today, the market, although not abundant with such devices, still has several interesting…

  • Review of Vabar Plus V2 Pod

    Vabar, already familiar to us for some of its sub-systems and disposable devices, has introduced a device from the last mentioned category. The sub-system has acquired a decent battery life, bright colors and a variety of flavors. The single-unit Plus V2 comes in a small plastic case, which weighs only 28.8g. The height of the…

  • Review of CoilART Blazar MTL Kit. First Look

    Today we will look at an interesting starter kit for cigarette puffs from CoilART, consisting of a pipe mod on an 18350 battery and a serviceable tank. Compact bundles of small mods and cigarette atomizers have been and will be in great demand among fans of stealth devices. And if there are no particular problems…

  • Review of Hotcig Kubi Pro Disposable Kit

    In this article we will talk about disposable devices from the line of devices with the common name Kubi from the Chinese manufacturer Hotcig. The famous company Hotcig continues to produce disposable devices, one of which is a device called Kubi Pro. The compact sub has a wide flavor palette, as well as quite competitive…

  • Review of Vaporesso PodStick Pod Kit

    Many people think of vaping as a mechanical mod with a drip chamber or a box mod with a tank that can produce huge clouds of delicious and thick vapor (the vaper can be seen from afar on the street). But as it turned out, not all vapers like a lot of vapor, and TX…