Review of Hotcig Marvel Pod. First Look

Review of Hotcig Marvel Pod. First Look

Today’s article will be devoted to a unique Pod-format device with two serviceable bases called Marvel, developed by Hotcig.

Relatively recently, a small revolution of sorts has taken place in the vaping industry – the so-called “pods” began to acquire almost full-fledged serviceable bases. The most famous examples of this are Pasito from Smoant, as well as Jester from Vapefly. The other day, the Chinese brand Hotcig joined this race of unusual Pod-format devices, releasing its Marvel Pod, which we are now going to get acquainted with.

Marvel Pod can be called a breath of fresh air in the production of “pods”, since the device is radically different from most of its analogues. online vaping shop in canada The device is made of zinc alloy and polycarbonate, and the back cover will be presented in seven colors for the user to choose from.

The front control panel of the device is no different from classic box mods. So, there is a physical Fire button, as well as power adjustment keys. The latter, by the way, can be adjusted in the range of 1-30W. In addition, the Marvel Pod is equipped with a full-fledged monochrome display with a diagonal of 0.96 inches and a micro-USB port, with which it will be possible to charge the built-in 1200 mAh battery with a current of up to 1A. The device also has three vaping modes: variable wattage, bypass and the so-called DIY mode.

The key feature of the Marvel Pod is the evaporators used here. In total, the manufacturer presented two types of non-serviceable ones for the device: with a resistance of 0.6 Ω and a mesh coil, as well as with a resistance of 1.2 Ω and a regular spiral inside. In addition to standard evaporators, the device has two more types of serviceable bases, which will have to be purchased separately.

The first such service can be called a DIY base. In essence, it is a kind of evaporator in which you can replace the winding yourself, and not in the most convenient way for users.

The second type of serviced bases for the Marvel Pod is a full-fledged RBA with two more convenient stands for one not too large coil and lower airflow, the adjustment of which is carried out by a special ring under the drip tip.

The Hotcig company also took care of the convenience of filling its brainchild, equipping it with a screw-on cap at the very top. In total, you can pour up to 2 ml into the liquid reservoir – a fairly average figure.

Hotcig Marvel Pod Specifications:

Dimensions: 91mm*39mm*20mm

Material: zinc alloy + PC

Battery capacity: 1200mAh

Working voltage: 3.3-4.2V

Supported resistance: 0.3-3.0Ω

Cartridge capacity: 2ml

Evaporators: 0.6Ω Mesh, 1.2Ω Regular, DIY, RBA

Similar Posts

  • Review of URBN 1500

    It’s hard to find a vaper who hasn’t tried salt nicotine-based liquids. You can argue for hours about their taste, strength, quenching nicotine hunger, but in any case it is necessary to admit that the salt nicotine-based liquids are firmly in the world of vaping, taking the last place in it. To vaporize such liquids…

  • Review of how getting to know Disposable FOF CANNON 2500

    In this review, we will get acquainted with a new line of disposable electronic cigarettes from the FOF Company for 2500 puffs under the “cannon” name CANNON. Attention: Everything written below is my personal opinion. Your perception of beauty may differ from mine. Packaging FOF CANNON 2500 Package? To hell with the packaging, who needs…

  • Review of VAPMOD 4000

    In this review I will continue to familiarize you with the products of ShenzhenSunZip Technology – single-use devices under the name of VAPMOD for 4000 puffs and the ability to charge the battery. The Chinese company ShenzhenSunZip Technology is an OEM/ODM manufacturer – i.e. it can produce devices both for itself and under its own…

  • Review of Augvape VTEC1.8 Mod. First Look

    In this article, we will look at the new version of the “engine box mod” from the Chinese manufacturer Augvape. Last year, Augvape introduced a very noticeable and remarkable V200 box mod, the creation of which was inspired by the Honda B18C Type R engine. In addition to the recognizable appearance, the device also had…

  • Review of Geekvape Aegis X Kit. First look

    The reason for this article was the long-awaited new product from Geekvape in the form of a continuation of the line of protected box mods Aegis. The series of box mods under the general name Aegis is considered one of the most successful products of the Chinese manufacturer of devices Geekvape. Indeed, these devices are…

  • Review of OBS Brand 132 Pod. First look

    In this article we will talk about a pre-charged pod system from the Chinese manufacturer OBS with the laconic name Brand 132 Pod. OBS has introduced another device in the form of a pre-charged pod system, the name of which is Brand 132 Pod. The device came in a wide range of flavors and colors,…