Review of Vaporesso Revenger X Kit

Review of Vaporesso Revenger X Kit

Vaporesso has a wide range of mods, atomizers, starter kits, POD-systems and accessories. The developers of the company together with the designers try to constantly surprise vapers, offering them new models, distinguished by originality and non-standard technical solutions. After the release of box mod Revenger or Avenger, which was very liked by vapers by its design and functionality, the company decided to release the updated Revenger X Kit. The new kit is interesting not only by its design, but also by its functionality, in particular by its large color display and sensitive touch buttons. The kit will appeal to beginners (it’s as easy to use and maintain as possible) and to vapers with experience (it has a lot of additional options for fine-tuning the modes of operation).

General Data

Vaporesso Revenger X Kit is a starter kit consisting of productive and functional Revenger X box mod and NRG atomizer on GT series interchangeable vaporizers intended for a wide range of Canadian vape shop montreal. box mod works on two batteries format 18650, so its maximum power can reach 220 watts. Among the features of the device are the touch control buttons, large color display and the OMNI 2.2 control board with a chip response rate of less than 0.1 sec. The kit comes in five colors green, red, rainbow, black and blue, so you can choose from both austere and bright options.

Kit

Kit Vaporesso Revenger X Kit is not particularly rich, but quite enough to put batteries in the device, pour liquid into the tank and smoke. Skeptics may say that you could have put a little more in the box, but nevertheless you can find in it:

Revenger X box mod;

NRG Tank atomizer with 5 ml pre-installed glass and GT8 vaporizer with 0,15 ohm resistance;

Replacement glass 2 ml;

USB cable for charging and flashing;

Replacement vaporizer GT4 with 0,15 Ohm resistance;

User’s Manual.

Revenger X Box Mod

Those vapers who have used or at least seen the Revenger can say that the new model is very much like it. And this is true because the Revenger X is made in the same stylish and slightly futuristic design, somewhat reminiscent of a smartphone rather than a box mod. In the device there are almost no perfectly straight lines and sharp corners, which can not help but please, because the ergonomics of the device at the highest level in the hand sits perfectly, it does not slip out.

The case is made of zinc alloy and plastic. It is worth saying right away that the plastic has a glossy coating, so fingerprints on it will be a common thing. On the front and back there is a unique coating IML, which is a special film that protects the surface from moisture and scratches. The maximum power of 220 watts is provided by two 18650 batteries, which are installed thanks to the removable side panel with magnets. The connector pad is located in the center of the device, which allows you to install atomizers with a diameter up to 28 mm without any problems. The presence of the USB-connector allows you to quickly charge the batteries with a current of 2.5 Ampere, as well as firmware updates.

On the front panel there is a display, which in inactive mode is quite difficult to detect. The control is done with the help of three touch buttons, which are illuminated when the display is activated. It is worth saying that the button fire is implemented in the traditional way on the side at the top. Locking the touch buttons is done automatically by just pressing fire.

Vaporesso company during the development of the device decided to install a productive and functional Omni 2.2 board, which has already proved itself in a positive way in other devices. Among the features of this board we can mention the possibility of working with coil resistance from 0,05 Ohm and response time less than 0,1 second. If we speak about the functionality of the device, there are many modes – VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RTC, BYPASS. Although the menu is quite complex, but allows you to configure the modes as precisely as possible depending on the vaper’s preferences.

The display is big enough and very informative on it you can find many parameters of the device, up to the time of the battery charge when using USB. As an additional plus you can consider the Smart mode, which adjusts the voltage applied to the coil, depending on the resistance of the coil. Eight levels of vibration make the device original and non-standard.

NRG Tank Atomizer

The complete NRG Tank atomizer has been used by Vaporesso in several kits for the past few years and proved its worth. Depending on the vaper’s preference, you can install a 5 ml bubble glass or a standard 2 ml one. The atomizer works on interchangeable vaporizers of different resistance, produced by the company especially for this tank. Lower adjustable blow-off, convenient refill and quick vaporizer change make this tank practical and easy to use, and at the same time you can get Excellent and full-bodied flavor.

Conclusions and impressions

Vaporesso has once again released a starter kit that is sure to catch the attention of both newcomers and experienced vapers alike because of its modern and original design that offers a high performance board. Vaporesso Revenger X Kit is a decent kit, there are a few complaints to certain points, but in general it fully justifies its cost, giving vapers stable performance board and Excellent and full-bodied flavor atomizer.


Advantages and disadvantages

Disadvantages

The board is a bit overshooty – it outputs a bit more power than is shown on the display;

For a beginner it is not easy to understand the menu;

Top end scratches quickly with atomizers.

Advantages

The original appearance;

Touch control buttons;

Functional board;

The possibility of fast charging;

Capacious tank;

High taste performance.

Similar Posts

  • Review of Geekvape B60 (Aegis Boost 2) POD mod kit

    In the last couple of years, sub-mods, distinguished by their practicality, autonomy, and functionality, have been especially popular among vapers. It is the devices of this format that successfully replace quite massive box mods and tanks with frantic bulk. Among the large assortment of such devices, the Aegis Boost from the company GeekVape stands a…

  • Review of Geekvape Aegis Squonk Kit. First Look

    Today we will look at the continuation of the Aegis mod series from Geekvape, but this time in the form of a squonk. The line of box mods under the general name Aegis, produced by the Chinese manufacturer Geekvape, currently includes quite a lot of devices, which in essence are not particularly different from each…

  • Review of Augvape Druga RTA

    For many vapers who came to the light side of vapor five or six years ago, the current trends of vaping development came as a big surprise, when instead of powerful box mods and drip tips with 0.05 ohm resistance, POD-systems and sub-mods became in demand. Therefore, vapers who appreciate taste and flavor, categorically refuse…

  • Review of Hastur RDA V2 by Cthulhu Mods – finalized

    Cthulhu Mods is a very young and popular Chinese company that has won hearts with their interesting and quality devices. And now they have released an updated, refined and improved version of their drip – Hastur RDA V2 Hastur RDA V2 by Cthulhu Mod Hastur is a mythical character from the world of Cthulhu, and…

  • Review of Chillax disposables 

    In today’s short article we will talk about another disposable, this time called Chillax from the Chinese manufacturer Famovape. The packaging is already something for which you can experience a sense of buzz for this device. In front of us is a plastic transparent box, on which there is a small cardboard wrapper. This is…

  • Review of Меchmod Constanta by FIR

    Today I want to tell you about one of the very first samples of the new product that I got my hands on for testing. Meet Constanta by FIR. Packaging and accessories of the Constanta mech mod The Constanta mech mod comes in a tin tube decorated all over with the Planck-Dirac constant symbol (if…