Review of Augvape Narada PRO AIO

The number of vape devices is constantly growing. And what is most interesting is that a couple of years ago the number of box mods, tanks, drip pots and squonks was growing, but now new PODs and AIO-systems are constantly coming out. The appearance of AIO-systems is quite logical, as POD-systems with their compact size have a number of disadvantages autonomy, lack of adjustments and options regarding the vaporizers used. In AIO-systems such problems are solved. Augvape released the Narada AIO-system not so long ago, which was very well liked by vapers, but they had a few questions about it. Therefore, the developers of the company sat down for drawings and tests, as a result of which the light saw the updated sub-mod Augvape Narada PRO AIO compact, functional, easy to work and autonomous. The device turned out to be very successful, and it can be prophesied quite a bright future.

General Info

Augvape Narada PRO AIO is a compact sub-mod, powered by a powerful battery, equipped with a simple chipset, designed to use removable cartridges and replaceable vaporizers. The form factor in which the device is made is quite familiar to many vapers looks like a small walkie-talkie. The presence of a simple board allows the vaper to choose the optimal power depending on preferences. The device is designed to use removable cartridges for installing replacement vaporizers or a serviceable base, which must be purchased separately. Augvape Narada PRO AIO can be purchased in three design options: black carbon fiber, black leather and wood.

Kit

Augvape Company always kits its devices quite decently, so vaper can not doubt that the new device is no worse than the previously released ones. In the black box the vaper will find:

Narada PRO Battery pack;

Removable cartridge Narada PRO Pod;

1ohm coil vaporizer for MTL draw;

0.4ohm mesh coil vaporizer;

USB Type-C cable for charging;

Warranty card;

User’s Manual.

Narada PRO Battery

It is difficult to find a company producing vape devices today that does not have AIO-systems in its assortment. It is such devices that are now in particular demand, as they are designed for a fairly full-fledged vaper’s service and choice of operating mode. Augvape has already offered vapers Narada AIO, which was decided to be slightly improved, so Augvape Narada PRO AIO saw the light of day.

The form factor, in which the device is made, is quite traditional, already used many times by many manufacturers after the appearance of Lost Vape Orion small walkie-talkie. But Augvape decided to add a little of its own corners of the device are beveled and additional decorative edges are added. For the convenience of carrying above the rather large fire button there is a small hole for passing a lanyard or a temlag.

Augvape Narada PRO AIO is made in rather compact dimensions – 82x40x18.5 mm, so it will fit perfectly into your pocket. The company’s designers made sure that the new sub-ohm vaporizer looks decent, so it is presented in three different designs, reminiscent of carbon, leather and natural wood.

The maximum power of Augvape Narada PRO AIO is 30 watts and it is provided by the built-in 950 mAh battery, which is a very good indicator for such a compact device. The battery is charged using the USB Type-C connector located on the bottom end of the device with a current of 2A (full charging time is 25-35 minutes).

The device is equipped with a simple enough board that allows you to use it in the varivatta mode with a power range of 5-30 watts. To control power, coil/vaporizer resistance and battery level, the device is equipped with a small monochrome display located on the upper end.

The Fire button is very interestingly realized – it is round and quite large, but in addition to activating the device, it allows you to adjust the working power it turns to the right or left, respectively, increasing or decreasing the power.

Narada PRO Pod cartridge

It is worth paying tribute to the manufacturer, who equipped Augvape Narada PRO AIO with a removable cartridge, for which we can say a special thanks to him. Depending on the vaper’s preferences, you can choose one of two variants of removable vaporizers on conventional spirals and mesh resistance of 1 and 0.4 ohms respectively. Naturally, the vaporizers are designed for tight cigarette puffing and the use of salt nicotine liquids or organic nicotine liquids and looser puffing.

An important plus of the device can be considered the possibility of installing a maintenance base, which must be purchased separately. The base is very simple, with two racks, designed to install one coil with a resistance of at least 0.4 ohms.

In order for the vaper to set the optimal puff, the cartridge has a small blowing regulator, thanks to which the device can be used for both MTL and DTL puffing.

Filling the cartridge is very simple on the side surface there is a small silicone plug, opening which you can pour 3.7 ml of liquid.

Conclusions and impressions

Augvape Narada PRO AIO is quite an interesting device, which will definitely appeal to many vapers, as they will get a productive, easy-to-use, self-contained and ergonomic device.

Advantages and disadvantages

Disadvantages

Not very convenient airflow adjustment;

The display is very small and not very informative;

Advantages

Small size;

Ergonomic design;

Capable battery;

Fast charging;

Possibility of setting the working power;

Original control system;

Large cartridge capacity;