Review of Augvape Intake Sub-Ohm Tank

Recently, it is very difficult to find new tanks and drip heads on the vape market, as it is very densely occupied by POD systems and sub-mods. It is quite logical and understandable many vapers prefer small and compact devices, designed for a relatively small amount of vapor and the use of liquids based on saline nicotine. But it doesn’t mean that big vape companies have completely abandoned traditional box mods and atomizers, they just produce a little less of them. Augvape decided to please vapers and presented its new Intake Sub-Ohm Tank, which is a continuation of the much-loved Intake line of atomizers, but designed for the use of replaceable vaporizers (many companies have such a tendency to release first serviced interesting tanks, and then present the un-serviced). In any case, vapers who love a lot of delicious and thick vapor can cheer this atomizer just for them.

General Info

Augvape Intake Sub-Ohm Tank is a medium-sized tankomizer designed to use branded vaporizers, with top air intake and bottom blowing, thanks to which there will be no problems with flavor and bulk. canadian vape shop toronto The tank is made in a rather traditional strict design, so it will fit perfectly with most box mods. The developers of the company decided to make the upper air intake, which goes down through special channels and is fed from below to the vaporizer, providing excellent flavor transfer and saturation. One of the features of the tank is a new type of vaporizer that uses a clapton-based mesh, which will have a positive effect on the flavor. The Augvape Intake Sub-Ohm Tank can be purchased in three colors steel, matte gun-metal and matte black.

Kit

The new atomizer is completed quite decently vaper will not have to think (at least in the first time after purchase) about the tank to work properly. In the cardboard box the vaper is waiting:

Intake Sub-Ohm Tank Atomizer;

Spare 5 ml bubble glass;

Mesh Coil15 ohm vaporizer;

Two Clapton Mesh Coil vaporizers (one pre-installed);

Spare orings;

Warranty card;

User’s Manual.

Appearance and design

If we analyze the vape market a little, then recently manufacturers do not spoil vapers with traditional novelties tanks, mechmods, drip tanks, squonks and box mods, as the company is based on a different segment of the market. But this does not mean that all vapers massively abandon the classic tanks. The number of users of traditional atomizers has decreased slightly, as not everyone is ready to give up the excellent flavor and bulk. Especially for them and was developed Intake Sub-Ohm Tank by Augvape and well-known reviewer MikesVapes.

Augvape Intake Sub-Ohm Tank is made in a rather classic design, so it will look great on almost any box mod. The diameter of the tank is 25mm, which is pretty much the standard at this point. The tank uses a traditional 810 no-rings delrin drip tip, which you can replace with any other from your collection.

The manufacturer offers two glass options for the tank standard straight glass with a volume of 3.5 ml and bubble glass with a volume of 5 ml. You can’t say that the volume is very large, because when using sabom vaporizers on the grid, the liquid consumption will be quite decent.

Vaporizers, blowing and peculiarities of use

Not so often the manufacturer pleases vapers with interesting sub-ohm tanks, but in the case of Augvape Intake Sub-Ohm Tank we can confidently say that the atomizer really deserves attention of those who do not want to spend time on self-installation of spirals and laying vapor.

Initially Augvape Intake Sub-Ohm Tank is equipped with two types of vaporizers, and one of them is on a traditional mesh with resistance of 0.15 ohm, and the second is a unique development of the company and is made on a mesh of Clapton Coil and has a resistance of 0.2 ohm.

Clapton Mesh Coil vaporizer is a combined heating element in which the mesh is made of Clapton Coil familiar to vapers. According to the manufacturer, this design of the vaporizer will allow you to get a flavor transfer comparable to a dual-coil drip, but whether it is true or not, it’s up to vapers to decide.

The design of the Augvape Intake Sub-Ohm Tank is quite interesting. The air intake is upper, and after that it goes through special channels into the base of the tank, ensuring that the airflow from below reaches the vaporizer. Such a design has several advantages at once tank is non-pouring and at the same time allows you to get an excellent flavor transfer. Airflow adjustment is made by means of a ring in the upper part of the tank.

To refill the tank you need to unscrew the top cap and pour 3.5 or 5 ml of liquid into one of the two holes, depending on what glass is installed.

Conclusions and Impression

Skeptics may say that the Augvape Intake Sub-Ohm is a simple untreated vape, analogs of which are not so few. But if you sort it out, the company’s specialists did everything to make the tank interesting and original. For this purpose, there is an original system of air intake and blowing, and also the vaper is offered non-standard vaporizers, thanks to which the vaper will get an excellent taste and flavor.

Advantages and disadvantages

Disadvantages

Only two types of vaporizers.

Advantages

Strict design;

Convenient refill;

810th classic drip tip;

Decent tank volume;

Spill-proof;

Original Clapton Mesh Coil vaporizers;

Excellent taste and flavor.