Review of Augvape VTEC v1.8 Box Mod

Review of Augvape VTEC v1.8 Box Mod

Despite the skeptical statements of some vapers, who claim that vaping has diminished what can be invented better than a DNA board, developers of large and not so large vape companies are constantly working on releasing more and more new devices. Naturally, the devices released now are very different from those used a couple of years ago, and for the better they have become more productive, more reliable, more functional. But at the same time, it is no less common when manufacturers decide to slightly improve the existing devices. This is exactly the situation with Augvape V200 box mod, which was slightly revised and released under the new name VTEC v1.8. The updated or, rather, new version of the box mod has become more functional and reliable, although externally it has not undergone significant changes. We can confidently say that Augvape VTEC v1.8 Box Mod will be perfect for those vapers who are looking for a high-quality and inexpensive box mod.

General Info

Augvape VTEC v1.8 Box Mod is a compact box mod powered by two standard batteries, equipped with an updated version of the board, which has excellent functionality and performance. The design of the new box mod specialists decided to leave it unchanged and it still looks like a reduced copy of the Honda Civic engine. canadian vape shop ottawa The main changes have affected the electronics in the new device uses an updated version of the chipset, which has excellent performance and functionality, thanks to which the vaper will be able to customize the device depending on personal preferences. Buy Augvape VTEC v1.8 Box Mod is available in three colors blue, black and red.

Kit

Kit of the new box mod is not much different from the kit of other box mods, not only from Augvape, but also from other manufacturers. Therefore, the vaper will get only:

Augvape VTEC v1.8 box mod;

USB cable for charging and firmware update;

Warranty card;

User’s Manual.

Appearance and design

Augvape company decided not to change the design of the box mod, so VTEC v1.8 is made in the same style. The vaper will get a box mod made in the form of a smaller Honda Civic car engine, but it is unlikely to upset anyone, as this design is characterized by originality and non-standard appearance.

The only change, or rather even an addition, can be considered an insert of artificial leather on the back side of the device, thanks to which the device sits better in the hand and does not slip. Due to the fact that the device resembles a car engine, the surface of its body has a large number of protrusions, the presence of which has a positive impact on ergonomics.

Like the previous version, Augvape VTEC v1.8 Box Mod has interestingly realized control. The fire button is on the top of the front panel (just in case it is marked with the corresponding symbol), and the +/- buttons are stylized under the oil cap, and this switch works on the principle of rotation. The connector pad is metal, designed to fit atomizers up to 26 mm in diameter.

The maximum power of the device is 200 watts, and it is provided by two traditional 18650 batteries, which are installed using the hinged cover on the bottom end of the device. The batteries can be charged using the standard micro-USB connector located under the display with a current of 1.2A.

Board, functionality and features of use

Like the previous version, the Augvape VTEC v1.8 Box Mod uses a proprietary chipset, but slightly modified and functional. Thanks to this, the vaper can use the device in variawatt, auto, varivolt, Bypass and the proprietary V Mode modes. If we talk about the last mode, it increases the performance of the device and the speed of triggering, as well as allows you to reduce energy consumption. The minimum resistance that the board is able to work with is 0.05 ohms, which is nowadays practically a standard for box mods powered by two batteries.

In order for a vaper to control the device’s operation, it has a small monochrome display, where you can find all the information necessary for a vaper: operation mode, power, coil resistance, voltage, puff time and battery charge level.

It should be said that the board works very stably, giving out honest power and resistance, and this is important for many modern mods, in which manufacturers deliberately overestimate the parameters of devices.

Conclusions and impressions

At first glance Augvape VTEC v1.8 Box Mod differs little from the previous version, but the main difference is the updated chipset. Naturally, if a vaper is used to using the device as it is, he will not be able to appreciate the advantages of the new board, but if he wants to get stable operation and the ability to fine-tune, he should buy Augvape VTEC v1.8 Box Mod.

Advantages and disadvantages

Disadvantages

No thermal control mode;

No ventilation holes for battery and board;

The location of the fire button takes some getting used to.

Advantages

Original design;

Non-standard control;

Simple setup;

Presence of branded mode;

Ability to fit fairly large atomizers;

Stability and performance.

Similar Posts

  • Review of Broadside ADMIRAL Mod

    In this review, I will tell you about a clone of the copper mechanical mod Broadside Admiral from BJ box mods for 20700 batteries. Packaging and equipment of Broadside Admiral The clone, like the original, is packed in a cardboard tube. The design of both is the same, including additional logos on the ends of…

  • Review of Hotcig Marvel Pod. First Look

    Today’s article will be devoted to a unique Pod-format device with two serviceable bases called Marvel, developed by Hotcig. Relatively recently, a small revolution of sorts has taken place in the vaping industry – the so-called “pods” began to acquire almost full-fledged serviceable bases. The most famous examples of this are Pasito from Smoant, as…

  • Review of OBS CUBE-X Box Mod

    Today’s review is dedicated to the new battery unit from one of the oldest Chinese manufacturers – CUBE-X Mod from OBS. OBS CUBE-X Packaging The OBS Company, as is customary for many modern manufacturers, and especially those famous for producing atomizers, can supply its new CUBE-X mod both separately and in a set with a…

  • Review of Griffin RTA by Geekvape

    Griffin RTA was released a long time ago, back in December last year, but I still want to tell you about this wonderful tank, as it will visit our store very soon. Geekvape are famous for their quality devices for a reasonable price, our guest is certainly among them. Griffin RTA by Geekvape The design…

  • Review of Меchmod Constanta by FIR

    Today I want to tell you about one of the very first samples of the new product that I got my hands on for testing. Meet Constanta by FIR. Packaging and accessories of the Constanta mech mod The Constanta mech mod comes in a tin tube decorated all over with the Planck-Dirac constant symbol (if…

  • Review of how getting to know Disposable FOF CANNON 2500

    In this review, we will get acquainted with a new line of disposable electronic cigarettes from the FOF Company for 2500 puffs under the “cannon” name CANNON. Attention: Everything written below is my personal opinion. Your perception of beauty may differ from mine. Packaging FOF CANNON 2500 Package? To hell with the packaging, who needs…