Review of SMOK Arcfox Kit

If you look closely at the devices on the vape market, there is an interesting feature that many manufacturers who started to mass produce PODs and submods, somewhat suspended their production and began to offer more and more traditional box mods and sub-mods. And one of the leaders in this industry is Smok, which recently presented several new box mods and tanks. Deciding to continue this tradition, the company presented SMOK Arcfox Kit quite an interesting starter kit that can replace the box mods and sabom tanks released earlier, as it was developed based on comments and suggestions from users. Overall, the SMOK Arcfox Kit is a stable mid-range kit that can meet the needs of most vapers.

General Information

SMOK Arcfox Kit is a starter kit that consists of the Arcfox box mod, which is designed for installation of two 18650 batteries and runs on a proprietary chipset, and TFV18 Tank atomizer with interchangeable vaporizers. The new box mod is made in a fairly standard form factor rectangular device with rounded corners and edges, and at the same time it has protection IP67, which will certainly appreciate the many vapers who lead an active lifestyle. The box mod has standard functionality, so no special claims to its work will not arise. The TFV18 Tank is a traditional tank, designed to use interchangeable vaporizers and even a serviced base. You can buy SMOK Arcfox Kit in six colors – rainbow, blue, red, gold, gun metal and black.

Equipment

If we talk about the content, the new starter kit is completed quite standard, without any extravagances, but at the same time the vaper will have everything he needs for trouble-free use. In the box the vaper waits:

Arcfox Mod box mod;

TFV18 Tank atomizer;

TFV18 Meshed 0,33 ohm vaporizer (pre-installed);

TFV18 Dual Meshed 15 ohm vaporizer;

Replacement bubble glass;

USB Type-C cable;

User’s Manual.

Arcfox Mod Box Mod

Smok company can be rightfully considered universal, as it produces almost any vape device (except for serviced tanks and drips), which almost always become a hit of sales. But not all box mods, successfully used by vapers, meet modern requirements, so the release of SMOK Arcfox Kit was quite logical and expected, as the new device is made with the wishes and comments vapers.

SMOK Arcfox Mod looks very stylish and dignified rectangular housing with rounded edges and corners. The device is made according to fashion trends in it there is an insert of eco-leather, what he reminds enough of GeekVape Aegis Legend. The box mod of average size is 88,25*55,6*30 mm, and it is designed for installation of atomizers with diameter up to 30 mm.

An important feature of the SMOK Arcfox Mod is that its case is protected by IP67, although there are certain questions about dust, moisture and shock protection.

The SMOK Arcfox Mod has a maximum power output of 230 watts, and it is powered by two traditional 18650 batteries, installed underneath the flip cover with a sealing gasket. The batteries can be charged using the USB Type-C connector located on the side surface and closed by a special plug, with a current of 2A.

Works box mod under the control of proprietary chipset, allowing you to get a fairly standard functionality varivatte and thermal control, but the board raises the resistance of 0.05 ohms (in TC mode). The display is color, located on the side surface of the device, and on it you can find traditional for Smok devices information like battery level, mode, power, coil resistance, voltage, number and time of puffs.

TFV18 Tank Atomizer

Hardly anyone would argue that the most famous atomizer from Smok is TFV, which has been updated many times by the manufacturer. The SMOK Arcfox Kit is made with TFV18 Tank, which is unlikely to be questioned by any vaper. It should be said right away that the tank is not of small size – its diameter is 31.6 mm, and the volume is 7.5 ml.

The TFV18 Tank uses TFV18 series vaporizers on the mesh and there are two of them TFV18 Meshed 0.33 Ohm and TFV18 Dual Meshed 0.15 Ohm in the kit. An important positive point is that if you want you can buy a serviced base for this tank, designed for installation of one or two spirals.

Blowing bottom, adjustable with a ring at the base of the tank.

To fill the tank you need to press a small button, push the top cap aside and pour 7.5 ml of liquid into a fairly large hole.

Conclusion and impressions

SMOK Arcfox Kit is a middle class starter kit, which will definitely appeal to both experienced vapers and beginners, as it is easy to maintain and operate, and will please you with the taste. We can not say that the device is innovative, but in terms of use it is one of the best and inexpensive options.

Advantages and disadvantages

Disadvantages

When charging under the top cover near the filling hole, there is no edge, you can spill liquid;

protection against moisture in the battery compartment is questionable.

Advantages

Small size;

Ergonomic design;

A great choice of colors;

IP67 housing protection;

Fast charging;

Easy operation;

Reliable and efficient chipset;