Review of Teslacigs Shinyo Kit. First Look

Review of Teslacigs Shinyo Kit. First Look

Today we will look at a rather unusual box mod from Teslacigs called Shinyo, as well as its complete tank Tind Tank.

The Chinese manufacturer of Teslacigs devices is currently a fairly well-known and recognizable brand. During its long activity, the just-mentioned company has released many devices, some of which have truly become popular. Of course, we are talking mainly about box mods performed by Teslacigs, the range of which has recently been replenished with a remarkable new product. We present to your attention the Shinyo Kit.

The Shinyo Kit consists of a box mod of the same name and a maintenance-free Tind Tank, and the “kit” is available in four colors: blue, steel, gunmetal and green. The atomizer is made of stainless steel, and the box mod is made of zinc alloy with rubberized inserts on the sides for better ergonomics. canadian vape shop toronto One of the distinctive features of the mod is the centrally located connector and symmetrical body shapes, which the manufacturer itself emphasizes.

The Shinyo Mod will be powered by two 18650 batteries, the compartment for which is hidden under the back cover with magnets. In this form, the device will be able to produce up to 213 watts of power.

It is impossible not to note another feature of the box mod – a large color TFT display with a diagonal of 2 inches, which will display all the information necessary for an ordinary user. In addition, Shinyo Mod also has the ability to update the firmware and several interface languages, including Russian, which is quite a rare phenomenon.

The complete Tind tank is a fairly typical non-serviceable one with a very large diameter of 28 mm. The tank received an impressive volume of 4.5 ml with an installed “bubble glass”, a wide drip tip and airflow adjustment using the lower rotary ring.

As a filling system, Tind Tank uses a standard method with a screw-on top cap on the thread, no surprises here. The performance of the device will be provided by only one type of maintenance-free evaporators – TS-X3 Mesh Coil 0.18Ω, designed for a power range of 70-80 W.

Teslacigs Shinyo Kit Specifications:

Mod dimensions: 50mm*29mm*90mm

Weight: 191g

Power: 2*18650

Output power: 5-213W

Output voltage: 1-7.5V

Operating modes: KA, TC (Ni, Ti, SS316, TCR)

Preheating modes: Hard, Norm, Soft, User

Supported resistance: 0.1-3.0Ω

Charging: 5V 1.5A

Tank dimensions: 28mm*51mm

Material: SS + PC

Weight: 57g

Capacity: 4.5ml

Evaporators: TS-X3 Mesh Coil 0.18Ω

Similar Posts

  • Review of Disposable WAKA SMASH 6000 from Relx

    In this review, I’ll tell you about WAKA SMASH disposable puffs for an impressive 6000 puffs, produced by Zovoo at the request of RELX. WAKA SMASH packaging WAKA SMASH disposables are sold in relatively small, slightly larger than a cigarette pack, boxes made of metallized cardboard. On the front side, in addition to a warning…

  • Review of Ronin B.A.D. – Epic Retribution

    If you want to plunge into the atmosphere of Japan, the new line of Ronin B.A.D. (Ronin Blooms and Dooms) will help you to do it. Let’s take a closer look at the new line. Design and appearance This line of Ronin B.A.D. is packed in matte cardboard boxes with separate elements highlighted with varnish….

  • Review of SMOK Mag P3 Kit. First Look

    This article will definitely please fans of SMOK products, because in it we will tell you about a starter kit consisting of a box mod and a tank called Mag P3 Kit. The conveyor belt for the production of devices at the SMOK brand does not stop working, it would seem, not for a minute….

  • Review of Zovoo Vincibar F600 Kit. First look

    Today we will look at new disposable devices with a stylish design from the Chinese manufacturer Zovoo – Vincibar F600 Kit. Chinese brand Zovoo, which produces disposable vape devices, has introduced a new product called Vincibar F600 Kit. The devices received a bright and stylish appearance, as well as an average reserve of autonomy and…

  • Review of Reload Vapor USA Reload S RTA

    The number of POD-systems and submods increases exponentially, as many manufacturers focus on this segment of the market. But this does not mean that vapers switch to them en masse, leaving on the shelf favorite box-mod and drip many buy compact devices for the output, in order to quickly vaporize. Just for them manufacturers (especially…

  • Review of Joyetech EXCEED X kit

    Recently, there is quite an interesting trend – more and more vapers prefer small devices that perfectly fit into the pocket and have minimal weight. And we are talking not only about POD-systems, but about full-fledged devices with interchangeable atomizers. Of course, the functionality of such devices is far from Evolv or Gene boards, but…