Review of Vandy Vape Berserker S Kit. First look

Review of Vandy Vape Berserker S Kit. First look

Popular YouTuber AlexVapersMD together with the Chinese company Vandy Vape released another device from the Berserker series in the form of a simple starter kit, and in this article we will consider the new product in all details.

The line of devices for cigarette puffs with one common name Berserker, behind which stands reviewer AlexVapersMD and manufacturer Vandy Vape, currently includes quite a lot of different representatives, and it seems that the developers are not going to stop there, since these devices are in great demand among users. canadian vape shop Today’s new product, unlike most of the previous ones, is aimed at fans of unserviced devices and is presented in the form of a simple “kit” without any innovative features. Let’s start studying the Berserker S Kit.

The Berserker S Kit is a compact bundle of an unserviced tank with a battery pack, the materials for which are mainly plastic. The height of the assembled setup is 96 mm, and the diameter is 22 mm. The “Kit” will be available for purchase in four body colors: black, white, red and blue.

The battery unit features a built-in 18350 battery with a fairly good capacity of 1100 mAh, which can be charged using a traditional micro USB port, and the battery discharge level can be monitored using the LED built into the Fire button. The latter, by the way, will also tell the owner about the selected vaping mode (bypass or constant voltage).

The complete atomizer received a design similar to the previous products of this series, expressed in the form of a stylistically designed top cover with a non-replaceable drip tip. The tank flask, in turn, is similarly made of plastic, and it can be filled with up to 2 ml of liquid – a completely acceptable volume.

Like any modern MTL atomizer, the tank from the Berserker S Kit has a lower tightening ring, by rotating which you can close the air intake holes of various diameters: 0.8 mm, 0.8 mm, 1.1 mm, 1.4 mm, 1.8 mm and 1.8 mm. The user will be able to achieve any tightness of the draft, from the loosest to the tightest.

Two types of replaceable evaporators will be responsible for the performance of the device. The first type migrated here from the previous Berserker MTL Kit, and the main difference of this replacement is the horizontally installed coil inside. The second type of evaporators represents a tribute to modern trends in the vaping market, since the mesh acts as a spiral here.

Vandy Vape Berserker S Kit Specifications:

Dimensions: 96mm*22mm

Output power: up to 25W

Working voltage: 3.2-4.2V

Output voltage: 2.8-4.0V

Supported resistance: 0.6-3.0Ω

Operating modes: BYPASS, constant voltage

Battery capacity: 1100mAh

Tank capacity: 2ml

Evaporators: M Coil 0.7Ω, 1.5Ω

Blowing: 0.8mm, 0.8mm, 1.1mm, 1.4mm, 1.8mm, 1.8mm

Similar Posts

  • Review of Elf Bar P1 Disposable Pod

    In this article we propose to get acquainted with a new pod system from the famous manufacturer Elf Bar called P1 Disposable Pod. The Chinese company Elf Bar, known for its numerous disposable devices, has presented a similar product, echoing in some respects the previously released RF350 Pod. The novelty is available in two versions…

  • Review of Disposable FOF NEBULA 4000

    In the text below, I will try the NEBULA line of disposable electronic cigarettes for 4000 puffs from the FOF Company and share my impressions. NEBULA packaging Disposable drinks with the ability to recharge the built-in FOF NEBULA battery are packaged in fairly compact cardboard boxes of a unique color for each taste. On the…

  • Review of Vaporesso LUXE 80 POD Mod kit

    Not so long ago the appearance of such format as pod-mods was perceived by many vapers if not with enthusiasm, then at least with pleasant surprise, because it is possible to get a compact and productive device. So it is not surprising that pod-mods are mass-produced by almost all manufacturers, and in quite original designs….

  • Review of VapX Violet YK1 Pod

    Today we are going to talk about a functional Violet YK1 sub-system with two types of cartridges, produced by Chinese device manufacturer VapX. VapX, a manufacturer of devices for vaping, has presented its new device in the format of a sub-system. The device came out in two editions at once and is able to work…

  • Review of Vaporesso GTX ONE Kit

    We cannot say that the global community has successfully defeated the coronavirus, but at least the quarantine in many countries has been somewhat relaxed. And one of the first countries where the quarantine was relaxed was China, which is practically the home of 90% of vape devices. As soon as Chinese manufacturers got an opportunity…

  • Review of Augvape DRUGA Narada POD

    Not so long ago, when the first POD-systems appeared, many vapers were distrustful of them, as it was very difficult to go from a 200-watt box mod and a drip to small low-power devices. But gradually POD-systems began to gain popularity, and now almost every vaper has such a device in his arsenal. This is…