Review of Joyetech Exceed Grip Plus Kit

Review of Joyetech Exceed Grip Plus Kit

The emergence of salt nicotine and its based liquids a couple of years ago made a small revolution in the world of vaping, as it was again in demand (though in a new format) with their relatively small amount of vapor. That is how POD-systems or closed systems appeared, which, although designed for salt nicotine-based liquids, but do not please all vapers, as their autonomy and performance are far from ideal. That is why they were successfully replaced by sub-mods. Joyetech decided to continue the line of Exceed, which has already gained the trust of vapers, but now in the format of a full-fledged submod Exceed Grip Plus Kit. Despite the fact that the new submod looks quite standard, it will please many vapers who care about autonomy, performance and ease of use.

General Information

Joyetech Exceed Grip Plus Kit compact pod mod that runs on a battery 18650, equipped with a proprietary chipset designed to work with interchangeable vaporizers series EZ and served by the base. The design of the new device is quite traditional for devices of this class, but at the same time it is small and easy to use. online vape shop canada The functionality of the board will also please you, as you can not only use it in varivatt mode, but also get a number of additional functions. The device works on interchangeable vaporizers EZ series, but you can always install a serviced base. Buy Joyetech Exceed Grip Plus Kit is available in five colors Swing Zebra, Street Art, Web, Geometry and just black.

Sets

The new sub-mod is packed quite decently and at the same time standard. Once again there is a question to manufacturers why not to put right away RBA-base, which must be purchased separately. In any case the vaper will find in the box:

EXCEED Grip Plus Battery Pack;

A removable EZ cartridge;

EZ 0.4ohm Coil;

EZ 1.2ohm Coil Vaporizer;

510th Drip-Tip;

USB Type-C cable for charging;

Warranty card;

User’s Manual.

EXCEED Grip Plus Battery Pack

The Exceed series of devices from Joyetech almost immediately after its appearance won the trust of users, as they are somewhat different from their counterparts in design and service features. But at the same time to them there were a number of comments from vapers, which have been corrected in the new device Exceed Grip Plus Kit. Some vapers will say that there are already a lot of similar devices, but this pod-mod will surely surprise many with its practicality and autonomy.

Joyetech Exceed Grip Plus Kit design is quite traditional for pod-mods rectangle with rounded corners, but it is quite small in size 91*44.2*21.4 mm. In the hand the device sits quite comfortably, and in a pocket will not particularly interfere. We must pay tribute to the designers who decided to release this device in the original design with a basic black color and interesting white prints.

The maximum power of Joyetech Exceed Grip Plus Kit 80 Watts is provided by a traditional 18650 battery, which is installed under one of the side panels, held by magnets. You can charge the battery with 2A current using the USB Type-C connector, located under the +/- buttons.

The manufacturer has equipped this device with a proprietary chipset, thanks to which the vaper is available not only traditional varivatte, but also an automatic selection of power depending on the resistance of the coil. Joyetech Exceed Grip Plus Kit is equipped with large enough for such a compact device color display, where you can find all the necessary information for the vaper regarding the operation of the device.

EZ cartridge

It is worth saying that Joyetech offers a universal version of the EZ cartridge, which is compatible with EXCEED” Grip, Grip Pro and Grip Plus series devices, so there are no difficulties with their purchase and purchase of vaporizers. The EZ cartridge is installed in the battery pack on the side, not under the lid, which is very convenient and practical.

The manufacturer offers at the moment two variants of EZ 0.4ohm Coil (on the grid) and EZ 1.2ohm Coil (on standard coil) vaporizers, but knowing Joyetech, you can expect the appearance of new vaporizers with different resistance.

If the vaper has a desire, he can always buy a serviced base for one coil, so you can choose the optimal resistance and install the coil yourself. And for burning spirals to the RBA-base comes with a base with 510-m connector.

The important feature of EZ cartridge is that it has blowing adjustment implemented with a small slider on the side surface, moving which you can set the puff.

The cartridge is refilled with a small hole closed with a silicone plug and you can open it and fill it with 2.6 ml of liquid.

Conclusions and impressions

Joyetech Exceed Grip Plus Kit is quite an interesting and functional device, which will definitely find its customers. Naturally, there are a few questions and comments, but on the whole sub-mod leaves only positive impressions.

Advantages and disadvantages

Disadvantages

The small volume of the cartridge;

When worn in a pocket the blow control is disrupted.

Advantages

The original design in black tones;

Rechargeable battery 18650;

Fast charging;

510drip-tip;

High-performance chipset;

Additional features;

Easy to replace vaporizers;

Serviceable base;

Adjustable air blow;

Easy to refill.

Similar Posts

  • Review of Goblin Mini v2

    Today we have an updated version of a popular device in our program. Our guest was released by UD (Youde Technology) and made a lot of noise in its time; meet its updated version – Goblin Mini v2. Goblin Mini v2 The appearance has not changed much. Only the size has changed, it increased by…

  • Review of Wasp Nano Pod Kit Wasp Stick by Oumier

    The popular and world-renowned company Oumier, has introduced to consumers a new device Wasp Nano Pod Kit. The minimalistic device was given two interchangeable cartridges with different integrated vaporizers, customizable puff and 950 mAh battery. This summer, Oumier announced a new POD system called the Wasp Nano Pod Kit on their website. The device has…

  • Review of Snowwolf MFENG baby kit

    Mfend Kit today is the flagship of Snowwolf” and the guys decided to release its mini version, which I will tell you about. MFENG baby kit” is a mini version of Snowwolf’s flagship. It will be necessary first of all for lovers of small devices” and beautiful bows. And it will be good for beginners…

  • Review of GeekVape AP2 POD kit

    Vape manufacturers are constantly trying to surprise vapers with their developments, and some of them can be called passable – users just read the description and do not pay attention to them. But many devices are really able to interest vapers by their technical parameters, functionality, practicality and autonomy. Such devices can be safely attributed…

  • Review of Geekvape ATHENA SQUONK KIT

    In this review, I will tell you about a set of a squonk mod for an 18650 battery and a dripper with the same name from the GeekVape company – ATHENA SQUONK KIT. The Chinese company Geek Vape, shortly produces a huge number of diverse and, most importantly, high-quality and popular devices. You can read…

  • Review of Меchmod Constanta by FIR

    Today I want to tell you about one of the very first samples of the new product that I got my hands on for testing. Meet Constanta by FIR. Packaging and accessories of the Constanta mech mod The Constanta mech mod comes in a tin tube decorated all over with the Planck-Dirac constant symbol (if…