Review of CoilART Blazar MTL Kit. First Look

Review of CoilART Blazar MTL Kit. First Look

Today we will look at an interesting starter kit for cigarette puffs from CoilART, consisting of a pipe mod on an 18350 battery and a serviceable tank.

Compact bundles of small mods and cigarette atomizers have been and will be in great demand among fans of stealth devices. And if there are no particular problems with the latter type of devices on the vaping market now, then the range of the former leaves much to be desired. Especially if we consider the so-called pipe mods, the most striking representative of which can be called the Cthulhu Tube from Cthulhu Mod, loved by many vapers. Trying to repeat the success of their colleagues, another Chinese company CoilART recently introduced a similar mod, in addition to everything, equipping it with a full-fledged MTL tank, and the whole kit was called Blazar Kit.

As mentioned above, the Blazar MTL Kit consists of a tank and a mod of the same name, the diameter of which is 24 mm. canadian vape shop toronto The battery unit is available in five body colors, three of which have an epoxy resin insert with a characteristic color, and the last one is completely painted black. The device received a side Fire button and runs on an 18350 battery.

Inside the tube mod, or rather in its upper part, there is a small board with a minimum set of protections, which is directly connected to the atomizer via a 510 connector. Something similar, by the way, could be seen in the previously mentioned Cthulhu Tube.

As for the complete tankomizer, it is a typical representative of cigarette makers with the same typical set of functions. So, there is a full blowing adjustment in the form of six holes of different diameters, one of which can be selected by a rotating rotary ring at the bottom.

As a filling system, Blazar RTA uses a top slider cap, hiding one small hole underneath, also equipped with a special valve – a kind of child protection, preventing liquid from leaking out when upside down. The capacity of the device, by the way, is quite decent and is 4 ml.

The deck of the device carries a simple base with two posts for one MTL build, equipped with grooves for cotton wool protected by edges and one single hole for lower airflow in the center. By the way, this base migrated here in its original form from another cigarette box from CoilART – Salt RTA.

CoilART Blazar MTL Kit Specifications:

Dimensions: 24mm*98mm

Tank capacity: 4ml

Single coil deck

Top filling with child protection

Working voltage: 3.0-4.2V

Supported resistance: 0.15-3.0Ω

Power: 18350

Side button

Bottom cover

Colors: SS, Black, Resin Green, Resin Yellow, Resin Purple

Similar Posts

  • Review of Artery PAL II Pro Pod Starter Kit

    The number of vapers who have recently decided to abandon rather bulky and large box mods and atomizers in favor of compact, closed-type systems is constantly growing. But fewer and fewer vapers now prefer standard POD systems made in the form of felt-tip pens or thermometers; they have little taste, and their autonomy is far…

  • Review of Innokin MVP5 Ajax Kit. First Look

    In today’s article, we will look at a box mod with a flashlight, compass and other features for outdoor activities called MVP5 from the Chinese manufacturer Innokin. Box mods for an active lifestyle are far from uncommon in the modern vaping industry. Today, the market, although not abundant with such devices, still has several interesting…

  • Review of Geekvape Aegis X Kit. First look

    The reason for this article was the long-awaited new product from Geekvape in the form of a continuation of the line of protected box mods Aegis. The series of box mods under the general name Aegis is considered one of the most successful products of the Chinese manufacturer of devices Geekvape. Indeed, these devices are…

  • Review of Disposable WAKA SLAM 2300 from Relx

    In this review, I’ll tell you about WAKA SLAM disposable 2300 puffs, produced by Zovoo at the request of RELX. WAKA SLAM packaging Disposable WAKA SLAM will fall into your hands packed in large cardboard boxes. If you take a closer look at the packaging, you will notice an image of a disposable product, technical…

  • Review of VAPMOD 4000

    In this review I will continue to familiarize you with the products of ShenzhenSunZip Technology – single-use devices under the name of VAPMOD for 4000 puffs and the ability to charge the battery. The Chinese company ShenzhenSunZip Technology is an OEM/ODM manufacturer – i.e. it can produce devices both for itself and under its own…

  • Review of Disposable EARTH I 1500 from FOF

    In this review I will talk about disposable electronic cigarettes with a removable mouthpiece and the strange name EARTH I for 1500 puffs from the Chinese company FOF. Packaging of FOF EARTH I 1500 Disposable EARTH I 1500 is sold in cardboard boxes that are indecently large for such a number of puffs. Color printing…