Review of asMODus ANANI Mtl RTA

Review of asMODus ANANI Mtl RTA

The number of vapers who prefer tobacco liquids and atomizers with a tight cigarette puff is not decreasing, but only growing. This is due to the fact that many vapers in the past are avid smokers, and tight cigarette puff for them is a kind of substitute for cigarettes. Almost every manufacturer is trying to release a tank or a MTL format drip, and everyone is trying to offer something interesting and original. Not an exception and such a well-known company asMODus, which decided to offer vapers a new tank ANANI Mtl RTA, which although it does not grab the stars from the sky, but will definitely interest vapers. The developers of the company in the new tank implemented some original technical solutions related to blowing, thanks to which the indicators of flavor transfer became much higher and more interesting. At the same time, the manufacturer states that you can use this tank on squonk boxes, and this is a significant plus.

General information

asMODus ANANI Mtl RTA tankomizer, designed for single coil use, intended for tight cigarette puffing, with a rather original design and the possibility of using the tank on squonks. The design of the tank is quite original due to the fact that instead of the usual glass is used ultem, and the design of the glass and top cap is somewhat non-standard. canadian vape shop edmonton The usual two-post deck is used to install the coil, and deep holes are provided for laying the vapor. An important feature of this atomizer is that it has holes in the tub for the possibility of installing the tank on squonk mods, providing a constant supply of liquid.

Bundling

We can’t say that asMODus has been greedy, as the new tank is packed quite decently. In the branded round box, the vaper will find:

ANANI Mtl RTA atomizer

MTL Fused Clapton Spiral;

Ni80 28G coil;

A blue screwdriver;

Spare screws;

Spare orings;

User’s Manual.

Appearance and design

Many vapers are well aware of asMODus company, which produces a lot of interesting devices, but until now there was not a single atomizer designed for a tight cigarette puff. Therefore, the appearance of asMODus ANANI Mtl RTA was quite expected and predictable. It is worth saying at once that the developers of the company clearly did not want to use standard technical solutions, having developed an original design, which will definitely interest vapers.

asMODus ANANI Mtl RTA is made of stainless steel, but there is one peculiarity instead of the standard glass is used tank made of ultem. Due to the use of a rather non-standard combination of the tank looks a little unusual, but very interesting. The design is quite interesting 510th drip tip is installed in a small cover made of ultem, which, in turn, is screwed on the top of the shaft and the dome. The fact that the dome has a spherical finish and ends the shaft with a tiny hole deserves special attention, thanks to which the vaper is guaranteed to get a tight puff.

The diameter of the asMODus ANANI Mtl RTA is 22mm, so the tank will fit most box mods perfectly. The 510 drip tip is very easy to replace with any other from your collection.

Base, Blowing and Usage Features

Considering that asMODus ANANI Mtl RTA is positioned as a tank for tight cigarette puffing, it uses a double rack deck for single coil installation. It is important to remember that the deck is designed to install a coil wound only in one direction. There will be no problems with installation, as the legs of the coil are fixed with two screws from above.

Laying absorbent cotton will not cause any questions or difficulties either, there is plenty of space for its laying. But here lies one of the chipsdevice bathtub is deep enough and it has four small holes, designed to asMODus ANANI Mtl RTA can be used on squonks. You can even say that installing a squonk pin, which for some reason is not included in the kit, turns the MTL tank into an MTL drip, which is an interesting and unusual solution.

asMODus did not come up with something particularly original in the ANANI Mtl RTA blowing system, it is realized with the help of several small diameter holes located directly under the coil. Such a decision can be confidently called correct, as such a design will definitely have a positive effect on the flavor transfer. Puffing is regulated by turning the ring at the base of the tank.

As mentioned above, asMODus ANANI Mtl RTA can be installed on squonk boxes, but if there is no such desire, it is very easy to pour liquid into the small three holes hidden under the top cover. The tank volume is small, but this is the standard for devices of this class.

Conclusions and impressions

asMODus ANANI Mtl RTA causes a double impression on the one hand the manufacturer has developed a rather original design and realized interesting technical solutions, and on the other hand everything is very complicated and somewhat complicated. But in any case, the vaper will get a universal atomizer for cigarette puffing, which will allow to get a good flavor.

Advantages and disadvantages

Disadvantages

Blowing is difficult to set up, as there are no accurate indicators of the diameter of the air intake holes;

No squonk pin included.

Advantages

Original design;

510 drip tip;

Glass won’t shatter when dropped, as the tank is made of ultem;

Convenient refilling;

Easy coil installation and vapor placement;

Deep tub;

Ability to use on squonks;

Excellent flavor transfer.

Similar Posts

  • Review of Metamorphose by FIR

    Metamorphose by FIR Packaging The lid of the wooden box is adorned with the manufacturer’s logo and the name of the device, and there are no other identifying marks on the outside. The Metamorphose mech mod is sold in several different versions, but regardless of the amount you are willing to pay for the product,…

  • Review of Elf Bar T800 Disposable Pod

    We offer a look at new cigarette filter disposables called T800 from a popular manufacturer of such devices – Elf Bar. Chinese company Elf Bar, known for its numerous and extremely popular disposables, has presented another such product. The novelty called T800 has got average characteristics, but one very useful feature for former smokers. T800…

  • Review of Freemax GEMM 80W Kit. First look

    Today we will consider a simple and very budget starter kit GEMM 80W Kit from Freemax. A fairly well-known Chinese manufacturer of vaping devices Freemax is engaged in the development and production of mainly unserviced tanks, as well as starter kits for beginner vapers. During its activity, this company has released several very remarkable devices,…

  • Review of  Wismec Luxotic BF Squonk Box kit

    Today we will talk about a squonk kit from Wismec called Luxotic BF Squonk Box kit. However, it has been a long time since we heard anything from the Chinese company Wismec. Or rather, this manufacturer has not released any particularly interesting new products recently. The guys were apparently preparing something really worthwhile.  The appearance…

  • Review of Elf Bar CR500 Disposable Pod

    Today let’s take a look at new disposables called CR500 from a popular manufacturer of such devices – Elf Bar. Chinese company Elf Bar, widely known for its disposables and other sub-systems, has recently presented its new product. The CR500 disposables have modest technical specifications, but unconventional appearance and a large flavor palette. CR500 are…

  • Review of Reuleaux Tinker 300W TC Kit with Column Tank от Wismec

    Everyone knows that Wismec is one of the fundamental companies in the world of vaping, because many of its products, which have already become legendary, have become (and remain) sales hits. Just think of Ryksa in several generations and interpretations. Despite the fact that the products Wismec successfully sells, the company’s specialists are constantly working…