Review of asMODus Anani V2 MTL RTA

Review of asMODus Anani V2 MTL RTA

Despite the fact that the vape market is overflowing with sub-mods and POD-systems nowadays, there are still debates among vapers about traditional tanks. The subject of the dispute is the same as a couple-three years ago, which puff is better tight cigarette or free hookah puff. It is impossible to say unequivocally which of the variants is tastier, as every vaper has his own preferences, and manufacturers take advantage of this. Many vapers remember asMODus Anani MTL RTA, about which we can say with the phrase from the famous YouTube video It’s a fiasco, bro. Specialists of asMODus company recognized that the tank is really not the most successful, and decided to rework it quite well, so asMODus Anani V2 MTL RTA saw the light. The changes are visible to the naked eye, and they are clearly for the better.

General Information

asMODus Anani V2 MTL RTA is a compact single-coil tankomizer designed for tight cigarette puffing with adjustable blowing. Designers of the company did not radically change the appearance of the atomizer, leaving it recognizable, and it still uses a plastic bulb and numerous facets. canadian vape shop calgary The base of the tank is designed to accommodate one coil, and the new version of the atomizer has an adjustable airflow. asMODus Anani V2 MTL RTA can be purchased in four colors matte silver, gold, black and silver.

Equipment

Unlike the previous version, the new tank is packed quite decently, although it is far away from Vandy Vape tanks, but the vaper will get everything he needs for trouble-free use. In the round box the vaper is waiting for:

 Anani V2 MTLRTA atomizer;

 Pre-wound Kanthal A1 fused Clapton6 ohm coil;

 Kanthal A1 28GA 1.0 Ohm prewound coil;

 Phillips screwdriver;

 Spare screws;

 Spare orings;

User’s Manual.

Appearance and Design

Not so long ago, the appearance of asMODus Anani MTL RTA caused a real storm of indignation among vapers who had a chance to try this tank. So many flaws were revealed during its use that after reading comments and watching numerous videos, asMODus developers must have grayed and decided to quit vaping. But, on the other hand, it was a hard magic pencil that made the developers revise the design of the tank, thanks to which the tank has changed significantly, and for the better.

The asMODus Anani V2 MTL RTA looks almost the same as its predecessor. At least, it is easy to recognize it among other tanks by its large edges and plastic flask. Although new elements have been added to the design: a notched air ring and a metal platform under the drip tip. The diameter of the new tank is 22mm, so it will fit almost any box mod.

Instead of traditional glass, the asMODus Anani V2 MTL RTA uses a 2ml Ultem tank, and there is no option to increase the volume, for example, with the help of bubble glass. On the positive side, this tank uses the classic 510 Ultem drip tip, which you can always replace with any from your collection.

Base, blowing and features of use

For reasons that are not quite clear, the developers of the company did not change the base in asMODus Anani V2 MTL RTA, leaving it the same as in the first version, although there were also complaints about its size and the way of installing the coil. Therefore, we will have to use the base, which is available.We can not say that the base of the new tank is not at all uncomfortable, it is designed for horizontal installation of one small coil, and wound only in a certain direction. It is fixed with two vertically placed screws.

There are deep enough grooves for laying the absorbent cotton, in which it will not be difficult to lay it. Initially, you will have to experiment with the length of the cotton tails, but after two or three times, the vaper will know exactly how much to leave.

Unlike the previous version, the asMODus Anani V2 MTL RTA features adjustable blowing, with several holes in the base of the tank being used for air intake. The air is supplied to the coil through nine small holes located directly under the coil, so the flavor will be quite decent.

Conclusions and impressions

asMODus Anani V2 MTL RTA can be called a work on errors, and not all the errors and comments have been eliminated, although many things in the tank have changed in a positive way. We can’t say that the new tank is an exemplary cigarette tank, but due to the adjustable airflow and a small vaporizing chamber, the vaper will get a very good flavor transfer.

Advantages and disadvantages

Disadvantages

Small volume of the tank;

Not very convenient coil installation.

Advantages

Original design;

22mm fit;

510 drip tip;

Traditional refill;

Convenient placement of absorbent cotton;

Adjustable airflow;

Really tight puff;

Good flavor transfer.

Similar Posts

  • Review of Joyetech Evio Solo POD kit

    Many vapers in the past are inveterate smokers who preferred standard cigarettes to delicious and flavorful vapor. Nowadays on the shelves of vape shops there are a huge number of vape liquids with more and more salt nicotine based liquids. It is because of the salt nicotine vaping discovered an opportunity to quench nicotine hunger…

  • Review of Augvape Narada PRO AIO

    The number of vape devices is constantly growing. And what is most interesting is that a couple of years ago the number of box mods, tanks, drip pots and squonks was growing, but now new PODs and AIO-systems are constantly coming out. The appearance of AIO-systems is quite logical, as POD-systems with their compact size…

  • Review of Hotcig Kubi X Disposable

    Today, let’s continue familiarizing ourselves with devices from the Kubi series from the Chinese manufacturer Hotcig and take a look at backlit disposables with the same name. Hotcig Company continues to fill the vaping market with its disposable devices, and one of such devices is the updated Kubi X. These disposables contain a standard set…

  • Review of VAPMOD 4000

    In this review I will continue to familiarize you with the products of ShenzhenSunZip Technology – single-use devices under the name of VAPMOD for 4000 puffs and the ability to charge the battery. The Chinese company ShenzhenSunZip Technology is an OEM/ODM manufacturer – i.e. it can produce devices both for itself and under its own…

  • Review of Geekvape Aegis X Kit. First look

    The reason for this article was the long-awaited new product from Geekvape in the form of a continuation of the line of protected box mods Aegis. The series of box mods under the general name Aegis is considered one of the most successful products of the Chinese manufacturer of devices Geekvape. Indeed, these devices are…

  • Review of Artery PAL II Pro Pod Starter Kit

    The number of vapers who have recently decided to abandon rather bulky and large box mods and atomizers in favor of compact, closed-type systems is constantly growing. But fewer and fewer vapers now prefer standard POD systems made in the form of felt-tip pens or thermometers; they have little taste, and their autonomy is far…