Review of Artery PAL II Pro Pod Starter Kit

Review of Artery PAL II Pro Pod Starter Kit

The number of vapers who have recently decided to abandon rather bulky and large box mods and atomizers in favor of compact, closed-type systems is constantly growing. But fewer and fewer vapers now prefer standard POD systems made in the form of felt-tip pens or thermometers; they have little taste, and their autonomy is far from ideal. Therefore, All-In-One or AIO format systems are becoming more and more in demand and popular, and the most popular are devices in which you can not only change evaporators, but also adjust the power of the device and the intensity of vaping. Not long ago, Artery, together with Tony B Project, presented the PAL II AIO system, which many vapers immediately liked. Inspired by the success, the same collaboration decided to introduce an updated version of the Artery PAL II Pro Pod Starter Kit, slightly modified and modified in accordance with the wishes of vapers.

General information

Artery PAL II Pro Pod Starter Kit” is a compact AIO system, equipped with a powerful battery, running on replaceable evaporators and having the ability to adjust the intensity of air intake and power. canadian vaping The design of the updated device will pleasantly surprise you; it is still the same laconic and stylish, capable of appealing to most vapers. Important The moment is the ability to set the device power that is optimal for the vaper, which will be supplied to the evaporators. The evaporators used in the device are presented in two variations, thanks to which the vaper can choose the optimal vaping mode and liquid, both organic and salt nicotine. Buy Artery PAL II Pro Pod Starter Kit” is available in five versions: monster squad, dazzle rainbow, gunmetal diamond, black carbon fiber and black diamond.

Equipment

Vapers who decide to purchase such a device will not have any questions at all regarding how the device is equipped, since the manufacturer has made sure that everything is included in the kit:

  PAL II Pro battery pack;

  Removable PAL II Pro cartridge with pre-installed 1.0 Ohm evaporator;

  Spare Extra Coil evaporator;

  Spare silicone plug;

  Spare orings;

  USB cable for charging;

  User guide;

  Warranty card;

  Certificate of Authenticity.

PAL II Pro Battery Pack

The joint development of Artery and Tony B Project PAL II, almost immediately after its release, was liked by many vapers because of its practicality, stylish appearance and original design. The fact that this device was of interest to many prompted the company to create a new device that is more convenient and functional. It should be said right away that the Artery PAL II Pro Pod Starter Kit “has a lot of differences from PAL II, not only in its appearance, but also in functionality.

If we talk about the design of the new second PAL, then this is a traditional rectangular device with slightly rounded corners. But at the same time, the manufacturer paid a lot of attention to the design, as its side panels are made of colored glass with a unique pattern, carbon fiber and special plastic with laser engraving. The PAL II Pro Pod body itself is made of 6063 aluminum.

The maximum power of 22 watts is provided by a built-in “” 1000 mAh battery, which is almost standard for devices of this class today. The battery is charged with a current of 0.8A using a standard micro-USB connector located on the side of the device.

The Artery PAL II Pro Pod Starter Kit has a fairly simple built-in chipset, with which you can adjust the power supplied to the evaporator within 5-22 Watts. In order for vapers to do this as conveniently as possible, it is necessary to remove the side cover with magnets, under which hides a small display with minimal display of information about the operation and two control keys.

PAL II Pro cartridge

As in the previous version, the Artery PAL II Pro Pod Starter Kit uses a removable cartridge that runs on replaceable evaporators. An important feature of the Pro version is that you can install a cartridge from the PAL II version at any time, which is very convenient. But in the version The Pro uses a traditional 510 drip tip, so the vaper at any time has the opportunity to independently replace it with another one that he likes better.

The evaporators that the manufacturer proposes to use in the PAL II Pro Pod have a resistance of 1.0 and 0.6 ohms on a standard coil and mesh. Naturally, you can use liquids based on salt or organic nicotine.

Installing the cartridge into the device is as simple as possible; it is screwed into a special ring, which, in turn, is screwed directly into the cartridge. At the same time, the ring is also an adjustment ring so that the vaper can set the optimal puff for him.

The PAL II Pro Pod uses two air intake vents, giving the vaper a richer, richer taste experience.

Refilling the cartridge is extremely simple: remove the side panel, open the silicone cap and fill in 2 or 3 ml of liquid, depending on the version of the device.

Conclusions and impressions

We can confidently say that the PAL II Pro Pod Starter Kit is a very worthy AIO system from Artery and Tony B Project, which will definitely appeal to many vapers looking for a stylish and original device. Due to the ability to choose a working evaporator, power, airflow and original design make it popular and practical.

Advantages and disadvantages

Disadvantages

Weak charging current;

There are two types of evaporators.

Advantages

Classic design;

Original colors;

Powerful battery;

510th drip-type;

Possibility of power adjustment;

Airflow adjustment;

Convenient refueling;

Excellent flavor transfer.

Similar Posts

  • Review of Eleaf iStick T80 Kit. First Look

    In this article, we invite you to get acquainted with the new T80 box mod from the iStick series and its complete Pesso Tank from Eleaf. The iStick box mod line from the well-known device manufacturer Eleaf currently includes a huge variety of different models and dates back to the inception of the vape industry…

  • Review of Joyetech EXCEED X kit

    Recently, there is quite an interesting trend – more and more vapers prefer small devices that perfectly fit into the pocket and have minimal weight. And we are talking not only about POD-systems, but about full-fledged devices with interchangeable atomizers. Of course, the functionality of such devices is far from Evolv or Gene boards, but…

  • Review of Augvape DRUGA Narada POD

    Not so long ago, when the first POD-systems appeared, many vapers were distrustful of them, as it was very difficult to go from a 200-watt box mod and a drip to small low-power devices. But gradually POD-systems began to gain popularity, and now almost every vaper has such a device in his arsenal. This is…

  • Review of Augvape Druga S RDA

    Vapers who started vaping 4-5 years ago, surely remember the joy when vape manufacturers presented a new tank or drip, and how many discussions there were about the design, features of use, taste and vapor. Naturally, now more and more fans of delicious and flavorful vapor prefer to simply buy a sub-mod or atomizer, designed…

  • Review of  Wismec Luxotic BF Squonk Box kit

    Today we will talk about a squonk kit from Wismec called Luxotic BF Squonk Box kit. However, it has been a long time since we heard anything from the Chinese company Wismec. Or rather, this manufacturer has not released any particularly interesting new products recently. The guys were apparently preparing something really worthwhile.  The appearance…

  • Review of Elf Bar P1 Disposable Pod

    In this article we propose to get acquainted with a new pod system from the famous manufacturer Elf Bar called P1 Disposable Pod. The Chinese company Elf Bar, known for its numerous disposable devices, has presented a similar product, echoing in some respects the previously released RF350 Pod. The novelty is available in two versions…