Review of SMOK Magneto

In this review, I will tell you right away about probably one of the first mechanical mods with constant contact, which is so loved by mechanical owners – SMOK Magneto.

The mechanical mod is produced and sold in a faceless cardboard box, it is not even painted… Useful information includes the names of the mod itself and the manufacturer, as well as two stickers, one indicating the color, and the second containing a number for checking the authenticity of the device.

Appearance and features of Smok Magneto

Magneto can work on any 18XXX batteries (18340/18350/18490/18500/18650/18700). When folded, it is just a brass tube 85 mm high, but once you start rotating the upper part, its length increases to an impressive 115 mm (and this is without the evaporator).

Of the designer delights on the mod, you can notice the wave grooves on the top cover, the grooves on the 510 connector and the dots on the base of the button. canada vape shops These tricks do not help in assembling / disassembling the mod, as well as the deeply engraved SMOK inscription, and therefore are considered decorations. Of the useful ones, it is worth noting only two small holes for gas outlet, which, however, will not help much. Due to the features (which are below), the mod is more likely to break in half than the pressure from a damaged battery leaves the body through these two holes.

Smok Magneto Specifications

Material Brass

Connector Adjustable, 510

Maximum mod height (18650) 115 mm

Minimum mod height (18350) 85 mm

Mod diameter 22 mm

Button mechanism Magnets

Button lock Yes, reverse threaded ring

Battery adjustment Permanent contact

Features Telescope

The connector here, surprisingly, is 510 (although back then it was fashionable to put eGo even in mechanical mods), but it has slots for lower air intake. On the other hand, these “grooves” can also be attributed to design delights.

SMOK Magneto – components

When disassembled, the mod consists of four main parts: the top cover, the telescope tube, the body and the button.

SMOK Magneto – connector disassembled

The top cover is made of brass and is connected with a fairly thin thread (approximately M20x1 with the telescope tube and conceals one important detail, about which nothing is written in the instructions. This is an adjustable positive pin. Before installing the evaporator, you need to unscrew it slightly, then screw the evaporator on and only then clamp it until it stops, ensuring reliable contact. You can safely screw evaporators that are not intended for a hybrid connection onto this type of connector (for example, most old clearomizers, and quite a lot of modern tanks with no maintenance).

SMOK Magneto – telescope

The telescope tube, judging by its weight and tactile sensations, is made of a secret Chinese alloy of foil and cardboard, and then galvanically coated with a thin layer of copper and brass on top. The part is so light and does not inspire confidence that it involuntarily raises concerns in its professional suitability. It is precisely the thin threads on this “thing” that will break off first of all in case of problems with the battery and no gas outlet holes will be needed.

SMOK Magneto – button

The button consists of four parts (I did not disassemble it, because it is pointless, there is nothing to look at there): the button body (chromed for variety), the brass button itself with an engraving of a spider and a second pressed magnet, a brass locking ring and a small brass ring retainer and at the same time the second element of the contact group.

There is not even the weakest spring inside and in the “free” state the button rattles quite a bit, and at the same time it shows well how much it can be squeezed out.

SMOK Magneto – button lock

The button is locked by a special ring with a reverse thread, i.e. by continuing to tighten the button you will immediately lock it, and when removing it from the lock, any extra force will lead to the button itself being unscrewed. It is worth admitting that due to the button protruding beyond the body, the locking mechanism in this mod is simply necessary.

Conclusions

For its time, SMOK Magneto was definitely a breakthrough! Works on any batteries, does not have an eGo connector, constant contact, the button is on magnets…

Similar Posts

  • Review of Wasp Nano Pod Kit Wasp Stick by Oumier

    The popular and world-renowned company Oumier, has introduced to consumers a new device Wasp Nano Pod Kit. The minimalistic device was given two interchangeable cartridges with different integrated vaporizers, customizable puff and 950 mAh battery. This summer, Oumier announced a new POD system called the Wasp Nano Pod Kit on their website. The device has…

  • Review of Geekvape Aegis X Kit. First look

    The reason for this article was the long-awaited new product from Geekvape in the form of a continuation of the line of protected box mods Aegis. The series of box mods under the general name Aegis is considered one of the most successful products of the Chinese manufacturer of devices Geekvape. Indeed, these devices are…

  • Review of Vaporesso Renova Zero POD

    POD-systems have appeared on the vape market relatively recently, successfully replacing the usual box mods and tanks with drips. This popularity is explained very simply, many vapers are happy to switch to POD-systems, because they are small in size, have a decent autonomy and, in most cases, are designed for the use of liquids based…

  • Review of Augvape Druga Foxy Mini Box Mod

    Recently, there is a rather interesting trend more and more vapers are deciding to give up tanks and drip pots with resistance of 0.05-0.1 Ohm, giving preference to simple single-coil tanks or atomizers running on 0.3-0.4 Ohm vaporizers. Accordingly, such vapers do not necessarily need to carry powerful and quite heavy box mods with a…

  • Review of Druga Squonk Box Kit (Druga Squonker)

    Quite recently, the Chinese company Augvape, famous for its dripper with an “almost unique” installation of coils, presented a squonk kit to the community — Druga Squonk Box Kit or Druga Squonker. Augvape can hardly be called an innovator in the vaping market; all the company’s solutions often have very similar analogues. Including the popular…

  • Review of Cosmo 2 Plus Kit space novelty from Vaptio

    The famous brand Vaptio has released a perfect and modern novelty called Cosmo 2 Plus Kit. The device consists of an adjustable mod with a high-capacity 3000 mAh battery, as well as a maintenance-free tank with a pair of vaporizers and a shock-resistant bulb. In early August this year, Vaptio announced on the Internet platform…