Review of Hotcig Marvel Pod. First Look

Review of Hotcig Marvel Pod. First Look

Today’s article will be devoted to a unique Pod-format device with two serviceable bases called Marvel, developed by Hotcig.

Relatively recently, a small revolution of sorts has taken place in the vaping industry – the so-called “pods” began to acquire almost full-fledged serviceable bases. The most famous examples of this are Pasito from Smoant, as well as Jester from Vapefly. The other day, the Chinese brand Hotcig joined this race of unusual Pod-format devices, releasing its Marvel Pod, which we are now going to get acquainted with.

Marvel Pod can be called a breath of fresh air in the production of “pods”, since the device is radically different from most of its analogues. online vaping shop in canada The device is made of zinc alloy and polycarbonate, and the back cover will be presented in seven colors for the user to choose from.

The front control panel of the device is no different from classic box mods. So, there is a physical Fire button, as well as power adjustment keys. The latter, by the way, can be adjusted in the range of 1-30W. In addition, the Marvel Pod is equipped with a full-fledged monochrome display with a diagonal of 0.96 inches and a micro-USB port, with which it will be possible to charge the built-in 1200 mAh battery with a current of up to 1A. The device also has three vaping modes: variable wattage, bypass and the so-called DIY mode.

The key feature of the Marvel Pod is the evaporators used here. In total, the manufacturer presented two types of non-serviceable ones for the device: with a resistance of 0.6 Ω and a mesh coil, as well as with a resistance of 1.2 Ω and a regular spiral inside. In addition to standard evaporators, the device has two more types of serviceable bases, which will have to be purchased separately.

The first such service can be called a DIY base. In essence, it is a kind of evaporator in which you can replace the winding yourself, and not in the most convenient way for users.

The second type of serviced bases for the Marvel Pod is a full-fledged RBA with two more convenient stands for one not too large coil and lower airflow, the adjustment of which is carried out by a special ring under the drip tip.

The Hotcig company also took care of the convenience of filling its brainchild, equipping it with a screw-on cap at the very top. In total, you can pour up to 2 ml into the liquid reservoir – a fairly average figure.

Hotcig Marvel Pod Specifications:

Dimensions: 91mm*39mm*20mm

Material: zinc alloy + PC

Battery capacity: 1200mAh

Working voltage: 3.3-4.2V

Supported resistance: 0.3-3.0Ω

Cartridge capacity: 2ml

Evaporators: 0.6Ω Mesh, 1.2Ω Regular, DIY, RBA

Similar Posts

  • Review of SMOK Arcfox Kit

    If you look closely at the devices on the vape market, there is an interesting feature that many manufacturers who started to mass produce PODs and submods, somewhat suspended their production and began to offer more and more traditional box mods and sub-mods. And one of the leaders in this industry is Smok, which recently…

  • Review of Uwell’s Valyrian R Pod Kit – upside down

    Another new product from Uwell is the Valyrian R Pod Kit. The device is quite compact with fast charging, innovative cartridge system with leak protection and maximum power of 22 watts. At the end of July this year, the famous company Uwell presented its novelty in the form of a device Valyrian R Pod Kit….

  • Review of Urban Mode disposables

    Today I’d like to introduce regular readers and not only readers to a disposable electronic vaporizer called Urban Mode. As in most cases, this thing comes in a cardboard box of bright monochrome design (by the way, it is by the color shade that you can guess the flavor at least a little bit). The…

  • Review of Reload RTA MTL

    Opinions of vapers who use bacomizers have been disagreeing for years about which inhaler or cigarette inhaler is better, with the same controversy regarding the taste of tanks with different inhaler inhalations. Practice shows that both types are constantly in demand, and it is impossible to say which one is more in demand. And if…

  • Review of LEGION by Troll Custom Competition Mods

    Many thanks to the manufacturer Troll Custom for providing a cool mech for review! The mechanical mod from Troll Custom Competition Mod has attracted the attention of vapers since its appearance on the market with its unusual appearance and fairly simple and clear design. Initially, the device was developed as a “competition”, but today it…

  • Review of mechanical mod PILOT 1.5 by 495 Cloud Buro

    The company 495 Cloud Buro was founded in 2016, I don’t have more precise data, and it’s unlikely that even the founders themselves remember them, but the date of the presentation of the very first mechanical PILOT mod has been preserved by history — January 18, 2017. Initially, the device was copper, without a button…