Review of HCigar Fodi RDTA – not a bad drip tank

Today I will tell you about a new drip tank from Hcigar -” HCigar Fodi RDTA. It got its popularity due to good boxmods from Hcigar. It has a pleasant appearance, a very attractive price and a tasty package, so that it is simply impossible to pass by! Available in two colors – steel and black.

HCigar Fodi RDTA

The main distinguishing feature of the drip tank is the bottom tank and the possibility of installing a single coil, as it comes with a plug on one of the sides. The tank is made of 316 stainless steel and has an acrylic driptip. The tank consists of 4 main parts: tank with vaporization chamber, the glass of which can be replaced, body, topkep for 510 driptip, which I think can be used as a wide driptip and 510 driptip.

The holes in the posts are 2mm, which will allow you to install very fat windings on 1 coil, but I don’t think you can do it on 2 coils, you’ll probably have to settle for a regular clapton. The insulator is not made of delrin, which is odd for a $30 drip, it is made of ceramic, which will keep the posts alive for a very long time. canadian vape shop There are 4 holes for laying absorbent cotton and they have a diameter of 4 mm.Also I would like to say that bakodripka has a gold-plated customizable pin and has 2 large (6x2mm) blow holes, which are adjustable by rotating the body. Filling also deserves a separate attention, for filling the tank there is a separate hole near the racks, which is closed with a silicone plug.

Technical specifications of the vaporizer

Diameter – 22 mm

Height with standard drip tip – 58 mm

Tank volume: 2,5 ml

2 blowing holes 6×2 mm

2 racks with 1 hole in each, diameter 2 mm

adjustable pin, gold-plated;

comes with a spare glass and a plug for 1 coil

Review of Reload Vapor USA Reload S RTA

The number of POD-systems and submods increases exponentially, as many manufacturers focus on this segment of the market. But this does not mean that vapers switch to them en masse, leaving on the shelf favorite box-mod and drip many buy compact devices for the output, in order to quickly vaporize. Just for them manufacturers (especially…
Review of Augvape S2 Squonk

Today we will look at an unregulated squonk on a MOSFET called S2, released jointly by the Chinese manufacturer Augvape and the Americans Mass Mods. This device is the result of cooperation between Mass Mods, which produces “mass”, but not at all cheap devices, and Augvape, which has recently been delighting users with a wide…
Review of Joyetech Exceed Grip Starter Kit

Recently, the popularity of POD-systems is off the charts. Whether it is because the vaping market got the salt nicotine-based liquids, or because vapers are fed up with big devices, but the fact is that the number of POD users is growing rapidly. They allow you to not generate too much vapor, but at the…
Review of Reload Pod System

It is unlikely that any of the vapers who started vaping four or five years ago could assume that ego devices will not only come back, but also transform into a rather interesting form of POD-systems. Such systems gradually replace quite heavy and bulky box-mods, tanks and drips, the more so that most POD-systems are…
Review of Goon RDA by 528 Customs and blueeyedgoon83

The last guest for today is the most long-awaited for me personally, because this device was created with the participation of coilbuilder for coilbuilders. It was created by 528 Customs and professional coilbuilder blueeyedgoon83, for which I thank them very much! This device is a drip with unrealistically large racks that will fit your most…
Review of Vaporesso SWAG II Kit

Vapers in the last few years have become quite picky and even to some extent capricious when choosing devices. That’s why manufacturers constantly have to surprise them by releasing more and more new devices. Many people know the Vaporesso SWAG box mod, which almost immediately after its presentation became very popular among vapers. The developers…

Similar Posts