Review of Gragas RDTA by OUMIER

Review of Gragas RDTA by OUMIER

OUMIER is one of the companies that do not often release their new devices, and in general not many people know about them. Today I will tell you about their new tank called Gragas RDTA, which will pleasantly surprise you.

Gragas RDTA by OUMIER

The design is very beautiful and nice due to the large two stacks, but only to drop it I do not advise you very much “hellip; Available tank in two colors black and steel. I don’t want to dwell on the appearance of the tank, simply because the tank offers us some unique technical solutions, so I will go straight to the technical part of the review.

Gragas RDTA by OUMIER

The base has a working diameter of 17 mm. The holes in the racks are 3×2.1 mm. The plus post is made of copper and gold-plated. e-cigarettes in canada Spirals are riveted with standard hex screws on the side.

Gragas RDTA by OUMIER

The tank capacity is 4mm, the refill is top filling and to put it mildly, poor. The opening is VERY small and is additionally covered with a plug. It is located under the lid.

Blowing is done by three holes in the middle of the body, the size of each of them is 9×2 mm, which will allow them to cope with high power. They are adjusted by turning the blowing adjustment ring, which has a knurling on it.

Gragas RDTA by OUMIER

And now to the most interesting and perhaps the most important part of the review. The tank has no direct contact with the liquid, in order to pump the coil (as funny as it sounds, considering that we are talking about the tank) you need to press on the upper part of the body, thus with the help of a special mechanism the liquid will get on the coil. It’s more like a squonk, only the liquid comes from the top instead of the bottom.

Gragas RDTA by OUMIER

The second feature is that by some simple manipulations the tank turns into a drip. Usually such simple manipulations do not end up in anything good, but personally I am attracted to a non-pouring drip with bottom-side blowing.

Gragas RDTA by OUMIER

The main problem with such innovations is that they are not always well thought out and the result is not always a good product. Personally, I would finalize the tank filling system and then I wouldn’t find any serious flaws in it. In fact, it all has to be seen in reality, when it will be in my hands. Personally, the only thing I don’t like so far is the refueling. I would advise you to buy some spare glass right away 🙂

Similar Posts

  • Review of CoilART Blazar MTL Kit. First Look

    Today we will look at an interesting starter kit for cigarette puffs from CoilART, consisting of a pipe mod on an 18350 battery and a serviceable tank. Compact bundles of small mods and cigarette atomizers have been and will be in great demand among fans of stealth devices. And if there are no particular problems…

  • Review of Uwell Evdilo Mod. First look

    In this article, we will study the box mod slider called Evdilo Mod from the famous manufacturer Uwell. A fairly well-known Chinese company Uwell is engaged in the development of the widest range of devices, from maintenance-free tanks with “pods” to full-fledged box mods with the most modern functionality. There are not so many of…

  • Review of Vaporesso Gen PT60 Pod Kit

    Fortunately or unfortunately, the era of powerful box mods and sub-mods is gradually fading away, as they are successfully replaced by more versatile sub-mods. Not to say that no one needs box mods anymore, they are needed, but vapers decide to switch to compact, autonomous and practical sub-mods. In this case, many manufacturers produce devices…

  • Review of Vandy Vape Berserker S Kit. First look

    Popular YouTuber AlexVapersMD together with the Chinese company Vandy Vape released another device from the Berserker series in the form of a simple starter kit, and in this article we will consider the new product in all details. The line of devices for cigarette puffs with one common name Berserker, behind which stands reviewer AlexVapersMD…

  • Review of Vaporesso LUXE 80 POD Mod kit

    Not so long ago the appearance of such format as pod-mods was perceived by many vapers if not with enthusiasm, then at least with pleasant surprise, because it is possible to get a compact and productive device. So it is not surprising that pod-mods are mass-produced by almost all manufacturers, and in quite original designs….

  • Review of Elf Bar 2500/3500

    The famous manufacturer Elf Bar actively continues to release new disposables, and today we will take a look at yet another such product. Elf Bar Company, which has become really famous for its disposables, has presented another such device. The novelty came in two variants in terms of autonomy, having already impressive technical characteristics. Disposable devices…