Review of Vaporesso SWAG II Kit

Vapers in the last few years have become quite picky and even to some extent capricious when choosing devices. That’s why manufacturers constantly have to surprise them by releasing more and more new devices. Many people know the Vaporesso SWAG box mod, which almost immediately after its presentation became very popular among vapers. The developers of the company, inspired by the success of this device, decided to continue this line and presented Vaporesso SWAG II Kit, which eliminated certain drawbacks and implemented quite original ideas. This compact starter kit will appeal to many fans of tanks for a tight draw or atomizers designed for installation of one coil, because it is productive, convenient and practical. We can’t say that the second version is cardinally different from the first, but there are a lot of changes for the better.

General information

Vaporesso SWAG II Kit is a starter kit consisting of NRG PE Tank Tank for vaporizers, and a compact box mod, working with a battery equipped with AXON chip, functional and productive. The tank is interesting because you can install nine types of vaporizers with different resistance, so the vaper can choose the best option depending on his preferences. The box mod is made on the updated AXON chipset, which allows you to get excellent functionality and performance. Vaporesso SWAG II Kit comes in four colors: black, red, black and blue, silver, black.

Kit

We can’t say that this starter kit is packed in a special way, it’s more like a standard set of devices of such class. Therefore, in the original box the vaper will find:

Box mod SWAG II Mod;

NRG PE Tank atomizer;

GT4 Meshed Coil vaporizer with 0, 15 ohm resistance;

GT CCELL Coil vaporizer with 0, 5 Ohm resistance;

Replacement Eringes;

USB charging cable;

Warranty card;

User’s Manual.

Box mod SWAG II Mod

The success of Vaporesso SWAG was an incentive for the developers of the company, they realized that this format of devices is demanded by vapers, and it makes sense to release another device in the same form factor. Vaporesso SWAG II box mod is small in size – 75 x 50 x 25 mm, so it sits perfectly in your hand and fits in your pocket. An important feature of the device is that you can install atomizers with diameter up to 25 mm, so the vaper has virtually no restrictions on the tanks and drips.

Designers have changed the form factor of SWAG II slightly, on one of its side panels there is a small depression, which makes the ergonomics of the device higher. The body is made of zinc alloy and plastic, and in its design strongly resembles the Gen MOD, which has already gained the trust of vapers.

SWAG II is powered by a traditional 18650 battery, installed vertically on the side of the atomizer and screwed by the lid (Pico by Eleaf comes immediately to mind). The battery can be charged via the micro-USB connector, on the side panel, with 2A current, so the charging time is relatively short.

This device is equipped with a proprietary AXON chipset, which has already proven itself in a positive way. The functionality of this chipset is not in doubt as the vaper is offered several modes of operation – POWER, TC (NI200, SS, TI), TCR, VV, BYPASS, Pulse mode, DIY mode, and not a fact that the vaper will use all, but they are available.

In order to control the operation of the device, it has a small monochrome display, where you can find the standard set of information level of the battery, coil resistance, mode, the number of puffs.

NRG PE Tank Atomizer

We can’t say that NRG PE Tank atomizer is anything unusual or non-standard – it’s quite usual, but still allows you to get good flavor and full flavor. Diameter of the tank is 25 mm, so it is logical to look not only on Vaporesso SWAG II, but also on any other mod.

An important feature of the NRG PE Tank is that the manufacturer offers nine different resistance vaporizers of different design, their resistance varies from 0,15-0,5 ohms, so there is a lot to choose from.

The brand new GT4 Meshed Coil vaporizer with 0,15 ohm resistance on the specially designed mesh is especially noteworthy among them so the vaper is guaranteed to get excellent flavor and fullness.

The volume of the tank is 3,5 ml, which is quite normal for such class atomizer. The filling of the tank is standard, you need to slide the top cap straight and pour the liquid in.

Conclusions and impressions

We can say for sure that Vaporesso SWAG II Kit is quite an interesting and practical kit, which many vapers will like. Due to the productive and functional chipset and a large selection of vaporizers, the vaper will get everything he needs from the kit in terms of flavor and fullness.

Advantages and disadvantages

Disadvantages

Overloaded functionality can have a negative impact on the board;

The board is a little bit wrong with the power and resistance readings.

Advantages

Compact size;

Ergonomic design;

Seat 25mm;

Fast charging;

Productive board;

Great functionality;

Nine types of vaporizers;