Review of Augvape Intake Dual RTA

Review of Augvape Intake Dual RTA

Despite the fact that many manufacturers of vape devices have paid maximum attention to such a market segment as POD-systems, not everyone has stopped working in the field of development of traditional devices. Naturally, new products do not appear as often as a couple of years ago (one or two devices every week), but still they appear, and each of the new products is definitely worthy of attention. One of the brightest examples is Augvape company, which constantly tries to stay on the crest of the wave. Many vapers remember the Intake RTA atomizer from Augvape, a single-coil flavor tank that appealed to many vapers immediately after its appearance. Based on the success of the first version, the company’s developers released the Intake Dual RTA two-aspirator version of the tank, which utilizes a top air intake and side blowing spirals. The second version of the atomizer is no less interesting than the first one, as it is not only a non-pouring tank, but also a truly flavorful tank that can surprise many vapers.

General Info

Augvape Intake Dual RTA tankomizer, designed to work with two or one spirals, which implements an original system of top air intake and side blowing, thanks to which the vaper will get a great taste and flavor. e-cigarettes in canada The design of the new tank is very similar to its predecessor, but the tank has become a bit bigger due to the use of a dual coil base, in which you can install a single coil. The use of bubble-glass allows you to get a very large volume, which can not but please vapers. Sufficiently original realized system of blowing air intake is top, and blowing is realized with the help of special channels directed to the spiral from the side. Augvape Intake Dual RTA is available in four colors: steel, gun metal, black and rainbow.

Kit

Even the most demanding vapers won’t have any questions about how Augvape has packed the new atomizer, as everything is done to the highest level. In the box the vaper is waiting for:

Intake Dual RTA atomizer with pre-installed standard 4ml glass;

A spare 5.8ml bubble glass;

Two pre-wound coils;

Organic cotton;

Hexagon;

Spare orings;

Spare screws;

Coil Trimming Tool;

User’s Manual.

Appearance and Design

It should be said right away that the Augvape Intake Dual RTA is not an updated version of the Intake RTA, it is a new full-fledged atomizer that has a lot of design features and chips. Naturally, certain analogies can be drawn, but they will be small. Externally, the tank is very similar to its predecessor, as it is made in the same strict design and in four colors.

Decor atomizer minimal name on the vaporizing chamber and relief engraving on the ring of blowing adjustment. And the engraving on the ring performs more practical role than aesthetic, its presence allows to adjust the blowing more conveniently. Augvape Intake Dual RTA is made in a diameter of 26 mm, as the increased base requires a little more space.

Depending on the vaper’s preferences, two types of glass can be used, a regular 4ml glass or a 5.8ml bubble glass, and when installing the second option, the vaper will get a significant autonomy. The standard 810 drip tip is non-ringing, so the vaper can replace it with any of his collection without any problems.

Base, airflow and usage features

The Augvape Intake Dual RTA (unlike the single-coil version) utilizes a rackless base for mounting two or one coil. The coils are mounted vertically using horizontal screws located in small recesses under the deck. Installation is extremely simple, as the manufacturer has equipped the device with Coil Trimming Tool, which can be used to precisely cut the legs of the coil to the optimal length. There will be no problems with laying the vapor as well, as there are deep enough channels with stoppers. If desired, you can install a single coil, and a fat one at that.

The Augvape Intake Dual RTA deserves special attention for its blowing system. The air intake is made from the top, and then the air through special channels located on the edge of the deck is fed to the side surfaces of the spirals. Such a technical solution allows you to get excellent flavor transfer and bulk.

Filling the atomizer is very simple and the traditional top cap is unscrewed, allowing you to pour liquid into quite large holes. It is worth noting that when using bubble-glass autonomy is guaranteed to the vaper, as not every atomizer has a volume of 5.8 ml.

Similar Posts

  • Review of Vabar Plus V2 Pod

    Vabar, already familiar to us for some of its sub-systems and disposable devices, has introduced a device from the last mentioned category. The sub-system has acquired a decent battery life, bright colors and a variety of flavors. The single-unit Plus V2 comes in a small plastic case, which weighs only 28.8g. The height of the…

  • Review of Vaporesso OSMALL 2 Pod Kit

    Now it is up to the vaper to decide which nicotine-based liquid he wants to vaporize – alkaline (aka freebase, aka organic) or saline. It is impossible to say which one is better or safer, but it is still nicotine. But after the appearance of liquids based on salt nicotine, many vapers began to quench…

  • Review of Chillax disposables 

    In today’s short article we will talk about another disposable, this time called Chillax from the Chinese manufacturer Famovape. The packaging is already something for which you can experience a sense of buzz for this device. In front of us is a plastic transparent box, on which there is a small cardboard wrapper. This is…

  • Review of Geekvape B100 (Aegis Boost Pro Max) 21700 Pod Mod Kit

    Despite the fact that quite often you can hear the phrases Vaping is no longer the same or Vaping is dead, manufacturers have not only not reduced the number of devices, but also increased it, offering vapers a variety of devices. Now it is difficult for a vaper to choose a device at the same…

  • Review of Ronin PREMIUM – Loyal to the end

    Introducing a liquid that has multi-level blends with richness and freshness, a new product called Ronin PREMIUM. Design and Appearance Ronin PREMIUM liquid comes in matte cardboard boxes with separate elements highlighted with varnish, the color of which depends on the chosen color. On the front edges there is the name of the line, the…

  • Review of Wasp Nano RDA Plus – Double Wasp by Oumier

    This is another novelty from the famous brand Oumier, which has developed an improved device called Wasp Nano RDA Plus. The device has a voluminous side blowing with detailed adjustment, four racks for a pair of spirals and a pin for bottom liquid supply. At the end of July this year, the company Oumier presented…