Review of ReLoad S RDA

Review of ReLoad S RDA

Eternal disputes of vapers about what is more practical and tasty than a tank or a drip, as a rule, do not lead to anything, since such principles and beliefs were laid down for more than one year. A drip gives brighter flavor and more bulk, but it is necessary to pump it after three to five puffs, a tank with more lubricated flavor transfer, but with a reservoir 3-5 times bigger than a vat of a drip. And no matter how hard manufacturers try to release new tanks, for a long time drips will not just be relevant, but mega popular. As an example we can take the company ReLoad Vapor USA, which in fact released one tank (yes, which became a model, but one) and several drips that became a cult. In order to keep the interest in its products and not only enjoy the former glory, the company regularly releases new drip atomizers, the last of which is considered to be ReLoad S RDA. This drip will definitely appeal to flavor lovers – ReLoad can be considered a guru in this regard, but it is also easy to maintain and operate.

General Info

The ReLoad S RDA is a single-coil drip atomizer with a convenient coil installation and a rather interesting blowing system that allows you to open up the maximum flavor of your liquid, getting plenty of swell at the same time. The drip is relatively small at first glance, but it combines well with most mech mods and box mods. online vape shop canada Using one coil and the original blowing system allows you to get a great flavor transfer and bulk, for which many vapers will like. At the moment the drip is presented by the company in three colors: steel, black and red, but maybe (like it was with ReLoad V1.5) other, more vivid colors will be presented.

Kit

The specialists at ReLoad Vapor USA did their best to make sure every buyer of this vape has no difficulties in finding the components for the vape. Therefore, in the original box you can find:

ReLoad S RDA drip atomizer with pre-installed squonk pin;

Regular pin;

Two hex wrenches;

Replacement screws;

Replacement O-rings;

Replacement insulator;

User Manual.

Of course, I wish the kit had more prewound coils and absorbent cotton, but that’s not the biggest problem you can have with this model.

Appearance and design

Like most ReLoad Vapor USA devices this vape is poorly decorated with decorative elements. The only decor is an engraving with the name of the drip and that’s it. But separate attention deserves the form of the vape – it really attracts attention at once, as it is made in the form of several stages, representing rings of different diameters. It looks quite unusual and original, but the view itself hints at the fact that under the dome there is a small evaporation chamber, and this is a serious request for excellent flavor transfer.

The drip-type is a classic 810 bezoring, made of translucent plastic. You can replace it with any of your collection if you want to customize your drip.

Seating diameter of ReLoad S is 24mm with 22mm evaporation chamber, so there are no difficulties and questions regarding the choice of mechanical or box mods, it will look great on almost anything.

Base, airflow and design features

Considering the fact that the ReLoad S RDA was originally designed as a flavor drip, it is designed to use a single coil. The base for the coil is made in a no-bar design, but (thanks to the developers for that), unlike many other single-coil drips, the base has four screws for mounting.

This technical solution allows you to install the coil winded in any direction, making the installation process as easy as possible. The coil is installed vertically, so the screws are parallel to the base of the drip.

The vat is small, but even the fact that the vape is initially sold with a squonk pin pre-installed hints at its use on the corresponding devices.

Special attention should be paid to the blowback. The dome of ReLoad S RDA consists of two rings (or skirts, as some people prefer to call it), the inner one is firmly fastened to the base with keys and has holes for top air intake, and the outer one put on top rotates and serves to regulate the airflow intensity. After the air intake the air goes down through the channel in the ring and is blown on both sides directly on the coil, blowing it on the sides and a little bit on the bottom, which allows to get an excellent flavor transfer.

Conclusions and impressions

ReLoad Vapor USA has once again released a decent product, though it’s hard to say yet whether it will become a cult product or not. That said, the ReLoad S RDA will definitely please vapers who want maximum flavor without forgetting the bulk. Easy to use and maintain it will be a worthy device in any vaper’s collection.

Advantages and disadvantages

Disadvantages

Difficult to set the optimal airflow;

Small vat.

Advantages

The original design;

Decent Kit;

Full blowing;

The ability to install spirals wound in any direction;

Excellent and full-bodied flavor.

Similar Posts

  • Review of Disposable WAKA SMASH 6000 from Relx

    In this review, I’ll tell you about WAKA SMASH disposable puffs for an impressive 6000 puffs, produced by Zovoo at the request of RELX. WAKA SMASH packaging WAKA SMASH disposables are sold in relatively small, slightly larger than a cigarette pack, boxes made of metallized cardboard. On the front side, in addition to a warning…

  • Review of Joyetech Vaal 5000

    Today we will tell you about a new device from the Vaal line from Joyetech with impressive autonomy indicators. Chinese manufacturer Joyetech has quietly introduced its new product called Vaal 5000. The small sub-ohm system comes with large capacity pre-filled cartridges and features charging capabilities. The Vaal 5000 comes in a streamlined plastic case that…

  • Review of Wismec el grande

    In this review, I will tell you about a rather old, but original mech mod from WISMEC — el grande. It seems that WISMEC has never even released this mod, either with a dripper or in its pure form. There is quite a lot of information about it on the Internet, it is even still…

  • Review of Justfog Q16 Pro Kit. Better – simpler

    Today’s review is dedicated to the compact “beginner” Q16 Pro Kit from the South Korean company Justfog, which specializes in the production of simple devices. JUSTFOG Q16 Pro Starter Kit Packaging The Q16 Pro Kit is sold in a small and rather nondescript thin cardboard box with an image of all possible color solutions on…

  • Review of asMODus Anani V2 MTL RTA

    Despite the fact that the vape market is overflowing with sub-mods and POD-systems nowadays, there are still debates among vapers about traditional tanks. The subject of the dispute is the same as a couple-three years ago, which puff is better tight cigarette or free hookah puff. It is impossible to say unequivocally which of the…

  • Review of Geekvape ATHENA SQUONK KIT

    In this review, I will tell you about a set of a squonk mod for an 18650 battery and a dripper with the same name from the GeekVape company – ATHENA SQUONK KIT. The Chinese company Geek Vape, shortly produces a huge number of diverse and, most importantly, high-quality and popular devices. You can read…