Review of Geekvape ATHENA SQUONK KIT

Review of Geekvape ATHENA SQUONK KIT

In this review, I will tell you about a set of a squonk mod for an 18650 battery and a dripper with the same name from the GeekVape company – ATHENA SQUONK KIT.

The Chinese company Geek Vape, shortly produces a huge number of diverse and, most importantly, high-quality and popular devices. You can read reviews of many of them on the website at this link. And the ATHENA SQUONK KIT itself has probably become the first squonk that is not only pleasant to hold in your hands, but also devoid of most problems.

ATHENA SQUONK KIT packaging

I got the ATHENA SQUONK KIT from far from the first batch, a clear confirmation of this is the packaging. If earlier on the dust jacket you could examine the device in all details, now everything has become much “more modest”, and the eye is drawn to warning inscriptions, like on cigarette packs. canada online vape shop On the front side of the package there is nothing at all except these inscriptions and the logo with the name of the device. The back side is given over to information about the manufacturer and a hologram with authenticity control.

The sides are almost completely pristine, only on one of them there is a mark about the color of the device, which, however, is also not worth trusting too much

What’s in the box

After removing the lid, you can see the mod itself, carefully placed in foamed plastic and additionally protected by thin foam rubber on the other side.

Geekvape Athena squonk kit

Under the mod itself, you can find a set of spare and not so spare parts: a business card with an advertisement and possible color solutions for the device, a soft silicone bottle, instructions and a bag with all sorts of little things.

The set of small parts: two thin silicone O-rings, two thick black O-rings and three thinner black O-rings, a squonk pin (it’s even strange why it’s in the add-ons and not installed by default), an adapter from 810 to 510 drip tip, the plastic 510 drip tip itself, four spare screws with notches for a slotted screwdriver and a three-way key (2 mm slot, 2.5 slot and Phillips).

ATHENA SQUONK RDA. Design

We’ll start getting to know the kit from the top, i.e. from the drip tip. The ATHENA SQUONK RDA is made according to the scheme with an upper air intake, painted black and has no decorations except for the device logo on one side and two ATHENA inscriptions on the airflow adjustment ring.

Dimensions and features of the ATHENA SQUONK MOD

Outer diameter 24 mm

Height without drip tip 24.5 mm

Height with 810 drip tip 30.7 mm

Blowing Top, adjustable

Blowing hole size 8*2 mm

Possibility of installing a squonk pin Yes

Bath depth 5 mm

Holes for installing coils 3*3 mm

Racks Conditionally vertical

Geekvape Athena squonk kit – RDA, bottom view

On the bottom side you can find the name, a couple of icons, serial number and information about the manufacturer.

On top of the drip there is an O-ring-less 810 drip tip, which has beveled inner edges and a visible height of 6 mm.

The lid, which is also the evaporation chamber, is painted entirely and, judging by the weight, is made of metal. There is no spherical processing from the inside, but there are protrusions (keys) under the airflow holes, which will allow you to accurately set these holes above the coils in the future.

Geekvape Athena squonk kit – RDA, regular and squonk pins

The squonk pin is gold-plated, just like the regular one, the difference between them is that the squonk uses Phillips (cross) slots, and the regular one uses regular (flat) ones. The regular pin consists of two parts, allowing you to adjust the amount of “protrusion” of the pin from the dripper.

The coils are fixed with four screws with slotted slots for a screwdriver. I have absolutely no complaints about the quality of the screws and their strength, it is well made and convenient.

Impressions

What I liked

Easiest installation of coils

Huge holes for the coils themselves

Excellent screws

Keys for directing the airflow to the coils

Ability to work in squonk mode (it would be strange if not)

Decent volume of the liquid tank

Quite tasty

What is simply good

You can install one coil

Airflow adjustment

Spare screws and o-rings

Adjustment of the positive pin (in non-squonk mode)

Adapter to 510 drip tip

Top airflow

What could have been better

Insufficient airflow for “powerful” windings

Weak o-rings on the deck

The airflow can be easily blocked by your lips during a puff

Low location of the squonk hole and, accordingly, the reverse flow of liquid

Total:

A pleasant and convenient flavor and non-flowing dripper, which at the same time can work with with quite serious windings

Similar Posts

  • Review of asMODus Anani V2 MTL RTA

    Despite the fact that the vape market is overflowing with sub-mods and POD-systems nowadays, there are still debates among vapers about traditional tanks. The subject of the dispute is the same as a couple-three years ago, which puff is better tight cigarette or free hookah puff. It is impossible to say unequivocally which of the…

  • Review of Disposable FOF PRO 800

    In this review, I will talk about small in size, but very rich in taste, PRO disposables for 800 puffs from the FOF Company. FOF PRO packaging The devices are packaged in compact cardboard boxes with an individual color for each taste, almost 100% matching the color of the stick inside and vaguely echoing the…

  • Review of Pulse BF Box Mod by Vandy Vape

    One of the newfangled trends in the vaping market – squonks – the Chinese company Vandy Vape could not ignore and was one of the first to offer vapers its new box mod Pulse BF Box Mod. As in many other cases, it could not do without the participation of a famous person, this time…

  • Review of Artery Pal SE V2 Pod System Kit

    We can talk for hours about the popularity of POD-systems and pod-mods, especially since manufacturers have emphasized their attention on this segment. It’s hard to find a company that doesn’t have POD-systems in its assortment, because they have successfully replaced box mods, tanks and drip tanks. Many vapers know the company Artery, which not so…

  • Review of Adept Mod & Zlide Tank Kit by Innokin

    How many functions do you use in your box mod? And how many does a beginner need? The Chinese company Innokin has created the simplest, but at the same time serious device in an IP67-protected case, which is perfect not only for a beginner vaper, but also for those who are tired of scrolling through…

  • Review of Hotcig Kubi XL Disposable Kit

    In this article, let’s take a look at the brightly colored Kubi XL disposables with a notable design from the not-so-famous Chinese manufacturer Hotcig. The Hotcig company, familiar to many by its numerous and at one time popular boxmods, is setting up the production of sub-systems and disposables, having recently presented the Kubi XL disposable….