Review of Augvape Intake Dual RTA

Review of Augvape Intake Dual RTA

Despite the fact that many manufacturers of vape devices have paid maximum attention to such a market segment as POD-systems, not everyone has stopped working in the field of development of traditional devices. Naturally, new products do not appear as often as a couple of years ago (one or two devices every week), but still they appear, and each of the new products is definitely worthy of attention. One of the brightest examples is Augvape company, which constantly tries to stay on the crest of the wave. Many vapers remember the Intake RTA atomizer from Augvape, a single-coil flavor tank that appealed to many vapers immediately after its appearance. Based on the success of the first version, the company’s developers released the Intake Dual RTA two-aspirator version of the tank, which utilizes a top air intake and side blowing spirals. The second version of the atomizer is no less interesting than the first one, as it is not only a non-pouring tank, but also a truly flavorful tank that can surprise many vapers.

General Info

Augvape Intake Dual RTA tankomizer, designed to work with two or one spirals, which implements an original system of top air intake and side blowing, thanks to which the vaper will get a great taste and flavor. e-cigarettes in canada The design of the new tank is very similar to its predecessor, but the tank has become a bit bigger due to the use of a dual coil base, in which you can install a single coil. The use of bubble-glass allows you to get a very large volume, which can not but please vapers. Sufficiently original realized system of blowing air intake is top, and blowing is realized with the help of special channels directed to the spiral from the side. Augvape Intake Dual RTA is available in four colors: steel, gun metal, black and rainbow.

Kit

Even the most demanding vapers won’t have any questions about how Augvape has packed the new atomizer, as everything is done to the highest level. In the box the vaper is waiting for:

Intake Dual RTA atomizer with pre-installed standard 4ml glass;

A spare 5.8ml bubble glass;

Two pre-wound coils;

Organic cotton;

Hexagon;

Spare orings;

Spare screws;

Coil Trimming Tool;

User’s Manual.

Appearance and Design

It should be said right away that the Augvape Intake Dual RTA is not an updated version of the Intake RTA, it is a new full-fledged atomizer that has a lot of design features and chips. Naturally, certain analogies can be drawn, but they will be small. Externally, the tank is very similar to its predecessor, as it is made in the same strict design and in four colors.

Decor atomizer minimal name on the vaporizing chamber and relief engraving on the ring of blowing adjustment. And the engraving on the ring performs more practical role than aesthetic, its presence allows to adjust the blowing more conveniently. Augvape Intake Dual RTA is made in a diameter of 26 mm, as the increased base requires a little more space.

Depending on the vaper’s preferences, two types of glass can be used, a regular 4ml glass or a 5.8ml bubble glass, and when installing the second option, the vaper will get a significant autonomy. The standard 810 drip tip is non-ringing, so the vaper can replace it with any of his collection without any problems.

Base, airflow and usage features

The Augvape Intake Dual RTA (unlike the single-coil version) utilizes a rackless base for mounting two or one coil. The coils are mounted vertically using horizontal screws located in small recesses under the deck. Installation is extremely simple, as the manufacturer has equipped the device with Coil Trimming Tool, which can be used to precisely cut the legs of the coil to the optimal length. There will be no problems with laying the vapor as well, as there are deep enough channels with stoppers. If desired, you can install a single coil, and a fat one at that.

The Augvape Intake Dual RTA deserves special attention for its blowing system. The air intake is made from the top, and then the air through special channels located on the edge of the deck is fed to the side surfaces of the spirals. Such a technical solution allows you to get excellent flavor transfer and bulk.

Filling the atomizer is very simple and the traditional top cap is unscrewed, allowing you to pour liquid into quite large holes. It is worth noting that when using bubble-glass autonomy is guaranteed to the vaper, as not every atomizer has a volume of 5.8 ml.

Similar Posts

  • Review of Augvape Druga Foxy Mini Box Mod

    Recently, there is a rather interesting trend more and more vapers are deciding to give up tanks and drip pots with resistance of 0.05-0.1 Ohm, giving preference to simple single-coil tanks or atomizers running on 0.3-0.4 Ohm vaporizers. Accordingly, such vapers do not necessarily need to carry powerful and quite heavy box mods with a…

  • Review of Advken Lynx 2500

    Chinese company Advken has taken up the production of disposables, and today we will tell you about perhaps the most interesting version of the brand’s range – Lynx 2500. Advken, a well-known developer of vaping devices, has recently been producing disposable devices under the name Lynx. This range has several versions depending on the preferred…

  • Review of Elf Bar P1 Disposable Pod

    In this article we propose to get acquainted with a new pod system from the famous manufacturer Elf Bar called P1 Disposable Pod. The Chinese company Elf Bar, known for its numerous disposable devices, has presented a similar product, echoing in some respects the previously released RF350 Pod. The novelty is available in two versions…

  • Review of Geekvape Aegis X Kit. First look

    The reason for this article was the long-awaited new product from Geekvape in the form of a continuation of the line of protected box mods Aegis. The series of box mods under the general name Aegis is considered one of the most successful products of the Chinese manufacturer of devices Geekvape. Indeed, these devices are…

  • Review of Elf Bar CR500 Disposable Pod

    Today let’s take a look at new disposables called CR500 from a popular manufacturer of such devices – Elf Bar. Chinese company Elf Bar, widely known for its disposables and other sub-systems, has recently presented its new product. The CR500 disposables have modest technical specifications, but unconventional appearance and a large flavor palette. CR500 are…

  • Review of Joyetech Exceed Grip Starter Kit

    Recently, the popularity of POD-systems is off the charts. Whether it is because the vaping market got the salt nicotine-based liquids, or because vapers are fed up with big devices, but the fact is that the number of POD users is growing rapidly. They allow you to not generate too much vapor, but at the…