Review of Augvape Druga RTA

Review of Augvape Druga RTA

For many vapers who came to the light side of vapor five or six years ago, the current trends of vaping development came as a big surprise, when instead of powerful box mods and drip tips with 0.05 ohm resistance, POD-systems and sub-mods became in demand. Therefore, vapers who appreciate taste and flavor, categorically refuse to buy new-fashioned devices and eagerly await new tanks, dripods, mods and squonks. Especially for them Augvape company decided to release a tankomizer based on the well-known and quite popular Druga drip, so recently the Druga RTA tank was presented. We can’t say that innovative/revolutionary technologies were used in the development of this tank, but the manufacturer still managed to realize some interesting features in it.

General Information

Augvape Druga RTA is a compact single coil tank with three-dimensional bottom blowing, thanks to which the vaper will get an excellent flavor transfer. The design of the new tank can hardly be called original, as it is a traditional tank, made in a rather strict and laconic style. e-liquids in canada The tank provides for the installation of a single coil located under a small dome, thanks to which the atomizer will please with taste and flavor, while not consuming a lot of power. The use of multiple blowing holes, located at different angles, will allow you to blow the coil from different sides, providing a good flavor transfer. The Augvape Druga RTA is available in three colors steel, black and gun metal.

Kit

It is impossible to say that Augvape has packed the new tank in a special way, as the kit is more than standard. In the box, the vaper will find:

Augvape Druga RTA bacomizer;

Bubble-glass 3,5 ml;

Spare orings;

Spare screws;

User‘s Manual.

Appearance and design

For many vapers Augvape Druga RDA has become more than just a drip, as in its time original racks, excellent taste transfer and flavor conquered lovers of delicious and aromatic vapor. Therefore, the release of a tankomizer that would continue this series was a matter of time. Compact and practical tank Augvape Druga RTA will surely win the hearts of vapers, especially those who have used and still use the same-name drip.

Augvape Druga RTA looks rather modest and laconic, but this is what makes it attractive, as not all vapers like bright colors and a lot of decorations. The only decorations are the Druga logo on the dome and small notches on the top lid, but they are more functional than decorative. The height of the tank is 39.5 mm, and the seating diameter is 24 mm, so there will be no problems with choosing a box mod for it.

Drip-tip is made of delrin, 810th, bezring, and made in a rather non-standard form. Depending on the vaper’s preferences, you can use either a traditional straight glass with a volume of 2.4 ml or a bubble glass with a volume of 3.5 ml.

Base, blowing and peculiarities of use

Naturally, many vapers who have used Augvape Druga RDA bought it because of the two original racks, so they are definitely interested in the question about the deck in Druga RTA. Under the small dome you can find four massive racks, but do not think that the tank is designed for two spirals, only one is installed.

Four racks allow you to install a single coil, which can be wound in any direction, and this is a big plus for a single coil tank. The holes for the coil legs are large, so a fat coil will be installed without any difficulties. The legs are fixed from above using standard Phillips screws.

There will be no problems with the absorbent cotton placement as well, as the cotton holes are large and located very conveniently, and a lot of absorbent cotton will fit in them.

Quite interestingly realized blowing, to which the manufacturer has assigned the proud name of 3D. The peculiarity of this blowing is that directly under the spiral are located at an angle of 45 degrees two rows of three holes, so that the air gets to the spiral from below. But at the same time there is one rather large hole in the large racks, through which the air is supplied to the side surface of the coil. This technical solution will allow you to get maximum flavor even when using a small coil. Adjustment is traditional ring in the base of the tank.

In order to fill the tank, you just need to unscrew the top cap (there are convenient notches on it) and pour the liquid into two large holes.

Conclusions and impressions

Augvape Druga RTA uses several interesting technical solutions, thanks to which we can safely say that the tank will definitely be in demand among vapers who prefer single-coil tanks. The tank is small, easy to maintain and operate, and, importantly, tasty due to the original blowing system and a small vaporizing chamber.

Advantages and disadvantages

Disadvantages

Small volume of bubble glass;

Only three colors.

Advantages

Small size;

Fit 24 mm;

Strict design;

810 drip tip;

Comfortable stands;

Possibility to use a coil wound in any direction;

Easy coil installation;

Large cotton holes;

3D airflow;

Excellent taste transfer and flavor.

Similar Posts

  • Review of Ronin PREMIUM – Loyal to the end

    Introducing a liquid that has multi-level blends with richness and freshness, a new product called Ronin PREMIUM. Design and Appearance Ronin PREMIUM liquid comes in matte cardboard boxes with separate elements highlighted with varnish, the color of which depends on the chosen color. On the front edges there is the name of the line, the…

  • Review of Eleaf Lychee – the same Cubis, only in profile.

    I have already told you about the Cubis tank and about many other tanks that are made in its likeness. This time Eleaf distinguished themselves and made their own cube-like tank, called Lychee, which is a sub-bomb tank with top airflow, which has replaceable evaporators, one of which with a notch coil inside, and a…

  • Review of Vaporesso Swag PX80

    Quite a long time exemplary vape device was box-mod power 200 + Watt, tank or drip on two spirals with resistance 0,1-0,15 Ohm. But today more and more vapers refuse such devices in favor of more compact and practical sub-mods. At the same time, some manufacturers adapt the previously released box mods and tanks for…

  • Review of VAPMOD 4000

    In this review I will continue to familiarize you with the products of ShenzhenSunZip Technology – single-use devices under the name of VAPMOD for 4000 puffs and the ability to charge the battery. The Chinese company ShenzhenSunZip Technology is an OEM/ODM manufacturer – i.e. it can produce devices both for itself and under its own…

  • Review of SMPL mechanical mod + Doge V2 dripper

    There’s a growing trend towards mechanical mods, particularly those with hybrid connectors and a streamlined design that minimizes threads and connections. Among them are box-style mech mods, which allow for the use of two 18650 batteries and, in some cases, larger 26650 batteries. However, for those just starting, a conventional pipe-style mech mod designed for…

  • Review of El Thunder by ViVA la Cloud

    The guys from ViVA la Cloud suddenly burst into the media space with a successful project of the same name, dedicated to various vape devices, liquids, and now just news related to the entertainment industry. It was quite unexpected to learn about the appearance of a mechanical mod from them back when it was not…