Review of asMODus .Blank RDA

Review of asMODus .Blank RDA

Many vapers and analysts (at least they call themselves so) of the vape market say that now there is a stagnation, manufacturers do not invent anything new, but only modernize what has already been released on the market. On the one hand the statement is true, but on the other hand it is not so easy to develop something mega innovative in this direction. But it should not be forgotten that vapers have become more demanding and capricious they are no longer satisfied with Subtank or Kennedy, so manufacturers are trying to offer interesting and original solutions based on existing ones. One example of this can be considered asMODus .Blank RDA single-spiral drip with a rather interesting design, well-made and able to please many fans of tasty and flavorful vapor.

General information

asMODus .Blank RDA is a single-coil, top-blown atomizer that allows you to discover the flavors of liquids familiar to vapers in a new way. canadian vape shop mississauga The decision to use a single-coil design was made by the specialists of the company for a reason, such drips due to the small volume of the evaporation chamber allows you to enjoy the maximum flavor transfer, and at the same time will please the bulk. Dripka asMODus .Blank RDA can be bought in four colors rainbow, steel, gold and black.

Equipment

The asMODus company is not only difficult, but even impossible to accuse that it kits its devices poorly, so this model will please the vaper with the number of accessories and their quality. In the branded packaging, which is difficult to confuse with something else, you can find:

A .Blank RDA drip atomizer with a pre-installed squonk pin;

Two spare Oni Triple Fused Clapton 0.2?4 coils.

Regular pin;

Two hex keys;

Spare Orings;

Spare screws;

User’s Manual.

Design and appearance

No one would argue that asMODus employs professional designers who can not only create unique products, but also keep the characteristic style of their devices. .Blank RDA is a typical representative of the asMODus family, as every line and every curve gives away its American origin (there are, of course, slight doubts about the fact that these products are manufactured in the USA, but they are 100% developed there).

The drip doesn’t attract attention with any decorative elements or ruffles. The only decoration is a branded engraving in the form of a wheel on the side surface of the dome. It should be said at once that small notches on the upper part of the dome “ndash; this is not a decoration, but a functional element that simplifies the process of adjusting the air supply.

In this model, the developers decided to correct their mistake of using branded drip tips with a non-standard diameter. The asMODus .Blank RDA is equipped with a rather simple 810 drip-type made of delrin, which most vapers will change for something more interesting, bright and original in their collection.

Asmodus also decided not to experiment with the seating diameter of the drip, it is made in the traditional version of 24 mm, so it can be successfully used on memods and boards of almost any size.

Blanking base and peculiarities of use

In asMODus .Blank RDA the base is represented by two massive stands, which serve not only to fix the coil, but also as a duct. Installing the coil is quite simple, but with some pitfalls, as the coil must be wound in a certain direction, although, if you figure it out, it’s not the biggest problem. For installation, the racks have wide enough holes to allow for relatively large coils to be installed, secured from above with hex screws. As with most drip tips, the Blank RDA is very easy to put the absorbent cotton in.

The tank is not very deep, capable of holding up to 1.5 ml of liquid, but taking into account that you can use the squonk pin at any time, you can get a huge autonomy (one coil consumes much less liquid than two).

The blowing system deserves special attention. The dome of the drip is made quite unconventionally under the outer dome there is another, smaller one, acting as an evaporation chamber. Such a solution allows you to get an excellent flavor transfer, especially since the internal processing of the evaporation chamber is hemispherical. Air intake is done from the top through six holes, after which it descends down the deck and enters through the holes in the posts directly onto the coil, blowing it from the sides and bottom.

Conclusions and impressions

asMODus .Blank RDA is definitely an interesting drip, which will be very appealing to connoisseurs of flavor. Naturally, there will be some remarks to it, but the use of the original double-dome design in combination with a non-standard solution regarding the air intake will override any negatives.

Advantages and disadvantages

Disadvantages

Very unattractive complete drip tip;

Spiral should be wound only in a certain direction;

It is difficult to adjust the puff to your taste.

Advantages

Strict stylish design;

Rich equipment;

Easy to install the coil and lay the vapor;

Non-standard blowing;

Excellent flavor transfer and bulk;

Possibility to use a squonk pin.

Similar Posts

  • Review of URBN 1500

    It’s hard to find a vaper who hasn’t tried salt nicotine-based liquids. You can argue for hours about their taste, strength, quenching nicotine hunger, but in any case it is necessary to admit that the salt nicotine-based liquids are firmly in the world of vaping, taking the last place in it. To vaporize such liquids…

  • Review of Меchmod Constanta by FIR

    Today I want to tell you about one of the very first samples of the new product that I got my hands on for testing. Meet Constanta by FIR. Packaging and accessories of the Constanta mech mod The Constanta mech mod comes in a tin tube decorated all over with the Planck-Dirac constant symbol (if…

  • Review of Wismec Skyladon

    In this review, I will tell you about another rather old, but surprisingly relevant mechanical mod from WISMEC — Skyladon. Wismec Skyladon packaging Appearance and features of Wismec Skyladon Dimensions of Wismec Skyladon Conclusions Price in online stores: SOURCEMORE $15.43 | Wismec Skyladon packaging The mod is sold in a minimalistic plastic transparent box. Through…

  • Review of Augvape Narada PRO AIO

    The number of vape devices is constantly growing. And what is most interesting is that a couple of years ago the number of box mods, tanks, drip pots and squonks was growing, but now new PODs and AIO-systems are constantly coming out. The appearance of AIO-systems is quite logical, as POD-systems with their compact size…

  • Review of Wotofo Nudge Box

    The hype around squonk devices continues to this day. More and more manufacturers are trying to release something of their own and, thus, join the sudden popularity of this format of devices. The Chinese company Wotofo has not pleased its fans with interesting new products lately, apparently preparing a truly interesting device. It must be…

  • Review of Geekvape Aegis Squonk Kit. First Look

    Today we will look at the continuation of the Aegis mod series from Geekvape, but this time in the form of a squonk. The line of box mods under the general name Aegis, produced by the Chinese manufacturer Geekvape, currently includes quite a lot of devices, which in essence are not particularly different from each…