Review of Freemax GEMM 80W Kit. First look

Review of Freemax GEMM 80W Kit. First look

Today we will consider a simple and very budget starter kit GEMM 80W Kit from Freemax.

A fairly well-known Chinese manufacturer of vaping devices Freemax is engaged in the development and production of mainly unserviced tanks, as well as starter kits for beginner vapers. During its activity, this company has released several very remarkable devices, among which there was no place for serviced atomizers or even box mods. And today’s new product is no exception. We invite you to familiarize yourself with the next creation of Freemax in the person of the “whale” GEMM 80W.

The GEMM 80W Kit contains a battery pack of the same name and a unserviced tank, and as available colors, the manufacturer offers to choose one of five options: rainbow, blue, black, purple or white. canadian vape shop edmonton The diameter of the pipe, like the tank, is 25 mm, and the height may vary depending on the version purchased.

Inside the battery block there is a fairly solid battery with a capacity of 2900 mAh, the charge level of which can be controlled using the green, yellow and red LED built into the Fire button. In addition, by pressing the same Fire button three times, it will be possible to switch between three preset output power modes: 40 W, 60 W and 80 W.

The complete GEMM Tank is a disposable device without the ability to replace the evaporator. The outer shell of the device is made mainly of plastic, which allows positioning the device as a consumable element. The tank will be available in two versions: regular and for the European market. The latter version differs in height and capacity.

For filling the tank, a special hole is provided in its upper part, covered with a silicone plug, and the GEMM Tank can hold up to 5 ml of liquid (2 ml for the TPD version).

As mentioned above, the atomizer does not provide for the replacement of the evaporator, and in case of failure of the latter, the entire device will need to be replaced. In total, Freemax has developed as many as six types of pre-installed evaporators of the G series, which will differ in resistance and the number of coils. Five replacements use a mesh as a spiral and only one uses a standard coil made of 316L stainless steel. An interesting solution can also be called the use of 90% cotton from tea tree fibers in the evaporators, which, according to the manufacturer, should improve the taste of the replacements.

Freemax GEMM 80W Kit Specifications:

Kit Height: 131.65mm (122.85mm TPD)

Diameter: 25mm

Tank Capacity: 4ml/5ml/2ml (TPD)

Battery Capacity: 2900mAh

Output Power: 40W, 60W, 80W

Output Voltage: Up to 4.2V

Output Current: Up to 42A

Supported Resistance: 0.1-3.0Ω

Evaporators: G4 0.15Ω, G3 0.15Ω, G2 0.2Ω, G2 0.5Ω, G1 0.15Ω, G1 0.12Ω

Similar Posts

  • Review of Wismec Reuleaux RX Machina

    Many vapers with a decent amount of vaping experience probably remember the first mechanical mod from Wismec with a very sonorous name Skyladon. At that time, it was quite a good device, albeit with some features and shortcomings. However, in those distant times, the mechanical mod industry was not so developed and the vaping market…

  • Review of Glasses Postless RDA by Tobeco

    Tobeco produce a huge number of devices, a lot of good ones, some bad ones too, mostly, of course, not bad. Today’s guest from Tobeco is at least unusual, and whether it is good or not you can decide for yourself, my business is to tell you about it and express your opinion. It is…

  • Review of Aegis Solo Mod with Cerberus Tank by Geekvape

    This review is dedicated to the fourth (!) Aegis mod, which is released to the market by Geekvape. And it may become the ideal choice for many users from the entire series of previously released protected devices. It has been two years (two!) since the release of the first IP67 protected device called Aegis (from…

  • Review of Joyetech EXCEED X kit

    Recently, there is quite an interesting trend – more and more vapers prefer small devices that perfectly fit into the pocket and have minimal weight. And we are talking not only about POD-systems, but about full-fledged devices with interchangeable atomizers. Of course, the functionality of such devices is far from Evolv or Gene boards, but…

  • Review of Augvape VTEC1.8 Mod. First Look

    In this article, we will look at the new version of the “engine box mod” from the Chinese manufacturer Augvape. Last year, Augvape introduced a very noticeable and remarkable V200 box mod, the creation of which was inspired by the Honda B18C Type R engine. In addition to the recognizable appearance, the device also had…

  • Review of Vaptio X-Hubble Mod. First look

    In this article, we will consider a fairly functional box mod called X-Hubble Mod from Vaptio. The relatively well-known Chinese manufacturer Vaptio is famous in the vaping market for its budget and very simple devices in the form of various kinds of box mods, “pods” and maintenance-free devices. However, sometimes the guys from this company…