Review of CoilART Blazar MTL Kit. First Look

Review of CoilART Blazar MTL Kit. First Look

Today we will look at an interesting starter kit for cigarette puffs from CoilART, consisting of a pipe mod on an 18350 battery and a serviceable tank.

Compact bundles of small mods and cigarette atomizers have been and will be in great demand among fans of stealth devices. And if there are no particular problems with the latter type of devices on the vaping market now, then the range of the former leaves much to be desired. Especially if we consider the so-called pipe mods, the most striking representative of which can be called the Cthulhu Tube from Cthulhu Mod, loved by many vapers. Trying to repeat the success of their colleagues, another Chinese company CoilART recently introduced a similar mod, in addition to everything, equipping it with a full-fledged MTL tank, and the whole kit was called Blazar Kit.

As mentioned above, the Blazar MTL Kit consists of a tank and a mod of the same name, the diameter of which is 24 mm. canadian vape shop toronto The battery unit is available in five body colors, three of which have an epoxy resin insert with a characteristic color, and the last one is completely painted black. The device received a side Fire button and runs on an 18350 battery.

Inside the tube mod, or rather in its upper part, there is a small board with a minimum set of protections, which is directly connected to the atomizer via a 510 connector. Something similar, by the way, could be seen in the previously mentioned Cthulhu Tube.

As for the complete tankomizer, it is a typical representative of cigarette makers with the same typical set of functions. So, there is a full blowing adjustment in the form of six holes of different diameters, one of which can be selected by a rotating rotary ring at the bottom.

As a filling system, Blazar RTA uses a top slider cap, hiding one small hole underneath, also equipped with a special valve – a kind of child protection, preventing liquid from leaking out when upside down. The capacity of the device, by the way, is quite decent and is 4 ml.

The deck of the device carries a simple base with two posts for one MTL build, equipped with grooves for cotton wool protected by edges and one single hole for lower airflow in the center. By the way, this base migrated here in its original form from another cigarette box from CoilART – Salt RTA.

CoilART Blazar MTL Kit Specifications:

Dimensions: 24mm*98mm

Tank capacity: 4ml

Single coil deck

Top filling with child protection

Working voltage: 3.0-4.2V

Supported resistance: 0.15-3.0Ω

Power: 18350

Side button

Bottom cover

Colors: SS, Black, Resin Green, Resin Yellow, Resin Purple

Similar Posts

  • Review of asMODus ANANI Mtl RTA

    The number of vapers who prefer tobacco liquids and atomizers with a tight cigarette puff is not decreasing, but only growing. This is due to the fact that many vapers in the past are avid smokers, and tight cigarette puff for them is a kind of substitute for cigarettes. Almost every manufacturer is trying to…

  • Review of Uwell Aeglos H2 Pod Mod Kit

    If a vaper stepped on the bright side five or six years ago, he probably remembers the first vapers that were successfully replaced by mech mods (often of dubious quality), 200+ watt box mods with 4 batteries, vapers with porn coils and tanks with 8 spirals. But, unfortunately or fortunately, progress is not standing still,…

  • Review of URBN 1500

    It’s hard to find a vaper who hasn’t tried salt nicotine-based liquids. You can argue for hours about their taste, strength, quenching nicotine hunger, but in any case it is necessary to admit that the salt nicotine-based liquids are firmly in the world of vaping, taking the last place in it. To vaporize such liquids…

  • Review of ReLoad S RDA

    Eternal disputes of vapers about what is more practical and tasty than a tank or a drip, as a rule, do not lead to anything, since such principles and beliefs were laid down for more than one year. A drip gives brighter flavor and more bulk, but it is necessary to pump it after three…

  • Review of Vaporesso LUXE 80 POD Mod kit

    Not so long ago the appearance of such format as pod-mods was perceived by many vapers if not with enthusiasm, then at least with pleasant surprise, because it is possible to get a compact and productive device. So it is not surprising that pod-mods are mass-produced by almost all manufacturers, and in quite original designs….

  • Review of Zovoo Vincibar F600 Kit. First look

    Today we will look at new disposable devices with a stylish design from the Chinese manufacturer Zovoo – Vincibar F600 Kit. Chinese brand Zovoo, which produces disposable vape devices, has introduced a new product called Vincibar F600 Kit. The devices received a bright and stylish appearance, as well as an average reserve of autonomy and…